Indicator panel
About the Indicator panel PCB
Indicator panel is an open source PCB design by dabridgham, published on GitHub. It is a 2-layer board measuring 133.1 × 77.2 mm, with 75 components from 16 distinct parts.
Other key parts include the MAX3094E, STP16CP05, MAX3033E and SPX1117M3-L-3-3. By type, the board carries 48 diodes, 9 resistors, 7 capacitors, 6 ICs and 5 connectors.
It belongs with the retro computing designs in this gallery.
From the project
QBUS Storage and I/O Card
Main components on the Indicator panel
Indicator panel bill of materials (BOM)
75 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX3094E | SOIC-16_3.9x9.9mm_Pitch1.27mm | U101 |
| 3 | STP16CP05 | SOIC-24_7.5x15.4mm_Pitch1.27mm | U102, U103, U106 |
| 1 | MAX3033E | SOIC-16_3.9x9.9mm_Pitch1.27mm | U104 |
| 1 | SPX1117M3-L-3-3 | SOT-223 | U108 |
| 1 | Power In (5 - 12V) | PJ-032B | J101 |
| 1 | Data in | Pin_Header_Angled_2x05 | P101 |
| 1 | Data Out | Socket_Strip_Angled_2x05 | P102 |
| 1 | Power | Pin_Header_Angled_2x04 | P103 |
| 1 | Power | Socket_Strip_Angled_2x04 | P104 |
| 48 | LED-45 | LED-0805 | D101, D102, D103, D104, D105, D106, D107, D108 +40 |
| 1 | 0.1μF | CP_Tantalum_Case-R_EIA-2012-12_Reflow | C101 |
| 1 | 10μF | CP_Tantalum_Case-R_EIA-2012-12_Wave | C102 |
| 5 | 100nF | C_0805 | C103, C104, C105, C106, C107 |
| 3 | 5.6kΩ | R_0805 | R101, R102, R103 |
| 4 | 150Ω | R_0805 | R104, R105, R106, R107 |
| 2 | 1kΩ | R_0805 | R110, R111 |
Indicator panel design files
The KiCad project lives in the dabridgham/QSIC-verilog repository on GitHub; these links point at the commit this page was built from.
Indicator panel: common questions
How big is the Indicator panel PCB?
The Indicator panel measures 133.1 × 77.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Indicator panel?
75 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Indicator panel design files?
From the dabridgham/QSIC-verilog repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Indicator panel design in my own project?
The repository has no license, so all rights stay with dabridgham. Use it as a reference, and ask the author before reusing the design.
More boards in QSIC-verilog
Similar boards
Amiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Atari pickup
26.4 × 53.9 mm7 parts2LGPL-3.01.0k
Deniseadapter
26.7 × 62.2 mm16 parts2LGPL-3.01.0k
Analog
53.9 × 23.2 mm33 parts2LGPL-3.01.0k
Rgb to hdmi
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k