SmartBin
DagaVedant·SmartBin·PCB/smartbin-hat.kicad_pcb
About the SmartBin PCB
SmartBin is an open source PCB design by DagaVedant, published on GitHub. It is a 2-layer board measuring 65 × 45 mm, with 30 components from 24 distinct parts.
Other key parts include the HX711 and MCP3208. By type, the board carries 10 resistors, 8 connectors, 8 capacitors, 2 ICs and 2 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
a sorting head that drops into a normal trash can and puts recyclables in the right side by itself
a sorting head that drops into a normal trash can and puts recyclables in the right side by itself.
demo video: https://www.youtube.com/shorts/8E3T3RMJy3o
demo video: https://www.youtube.com/shorts/8E3T3RMJy3o
you drop something on the pan. the load cell feels the weight change, the camera photographs the item, and a small neural net running on a pi zero w decides what it is. a servo tilts the pan and the item slides into the recycling side or the trash side. if the net is not sure, it goes to trash.

Main components on the SmartBin
SmartBin bill of materials (BOM)
30 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HX711 | SOP-16_4.4x10.4mm_P1.27mm | U1 |
| 1 | MCP3208 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | AO3400A | SOT-23 | Q2 |
| 1 | Pi GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Load cell | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Servo supply | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Servo | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Battery sense | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | LED ring | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Beam RX | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Beam TX | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 6 | 100nF | C_0805_2012Metric | C1, C2, C3, C5, C6, C8 |
| 1 | 10uF | C_0805_2012Metric | C4 |
| 1 | 470uF | CP_Radial_D8.0mm_P3.50mm | C7 |
| 1 | 12k | R_0805_2012Metric | R1 |
| 1 | 11k | R_0805_2012Metric | R2 |
| 2 | 100k | R_0805_2012Metric | R3, R7 |
| 1 | 22k | R_0805_2012Metric | R4 |
| 1 | 220R | R_0805_2012Metric | R5 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100R | R_0805_2012Metric | R6 |
| 1 | 10k | R_0805_2012Metric | R8 |
| 1 | 150R | R_0805_2012Metric | R9 |
| 1 | 0R | R_1206_3216Metric | R10 |
SmartBin design files
The KiCad project lives in the DagaVedant/SmartBin repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/smartbin-hat.kicad_pcb
- SchematicPCB/smartbin-hat.kicad_sch
SmartBin: common questions
How big is the SmartBin PCB?
The SmartBin measures 65 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SmartBin?
30 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the SmartBin design files?
From the DagaVedant/SmartBin repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SmartBin design in my own project?
The repository has no license, so all rights stay with DagaVedant. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979