MPU6050 esp32Lolin
About the MPU6050 esp32Lolin PCB
MPU6050 esp32Lolin is an open source PCB design by DamianPodrazaCode, published on GitHub. It is a 2-layer board measuring 25.8 × 44.8 mm, with 19 components from 12 distinct parts.
Other key parts include the G.top015(Gms-g9) and MPU-6050. By type, the board carries 7 resistors, 6 capacitors, 2 ICs, 2 connectors, 1 diode and 1 inductor.
Main components on the MPU6050 esp32Lolin
MPU6050 esp32Lolin bill of materials (BOM)
19 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | G.top015(Gms-g9) | G.top015(Gsm-g9) | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 2 | Conn_01x13_Male | PinHeader_1x13_P2.54mm_Vertical | J1, J2 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 600R 100MHz 200mA | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | FB1 |
| 1 | 1u | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C1 |
| 1 | 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 2 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 1 | 2n2 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 4 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 3 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7 |
MPU6050 esp32Lolin design files
The KiCad project lives in the DamianPodrazaCode/KiCad-PRJ repository on GitHub; these links point at the commit this page was built from.
MPU6050 esp32Lolin: common questions
How big is the MPU6050 esp32Lolin PCB?
The MPU6050 esp32Lolin measures 25.8 × 44.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MPU6050 esp32Lolin?
19 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the MPU6050 esp32Lolin design files?
From the DamianPodrazaCode/KiCad-PRJ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MPU6050 esp32Lolin design in my own project?
The repository has no license, so all rights stay with DamianPodrazaCode. Use it as a reference, and ask the author before reusing the design.
More boards in KiCad-PRJ
Skaner3d
175 × 90 mm52 parts2LNo license0
ESP32Esp32 IMU GPS
85 × 55 mm28 parts2LNo license0
Waga
160 × 80 mm25 parts2LNo license0
Usb usart CH340 full 3v3
40 × 40 mm20 parts2LNo license0
Usb usart CH340 full 5v
40 × 40 mm18 parts2LNo license0
UTerm2-s exp
55 × 58 mm17 parts2LNo license0
MPU6050
15.6 × 20.3 mm9 parts2LNo license0
Nucleo144 and 2.2 S6D0164 lcd parallel 16bit
100 × 70 mm8 parts2LNo license0
Nucleo144 and 2.2 ILI9341 lcd SPI
100 × 70 mm8 parts2LNo license0
Nucleo144 and 4.3 SSD1963 lcd parallel 16bit
100 × 70 mm5 parts2LNo license0