HardLabs

Esp32 IMU GPS

DamianPodrazaCode·KiCad-PRJ·esp32_IMU_GPS/esp32_IMU_GPS/esp32_IMU_GPS.kicad_pcb

Esp32 IMU GPS PCB layout, top view — open source ESP32 board by DamianPodrazaCode

About the Esp32 IMU GPS PCB

Esp32 IMU GPS is an open source ESP32 PCB design by DamianPodrazaCode, published on GitHub. It is a 2-layer board measuring 85 × 55 mm, with 28 components from 12 distinct parts.

Its main chip is the ESP32_Lolin32_Lite, from the ESP32 family. Other key parts include the G.top015(Gms-g9) and GY-9250. By type, the board carries 8 jumpers, 6 resistors, 4 connectors, 2 modules, 2 switches and 2 diodes.

It belongs with the rf & radio and sensors designs in this gallery.

Main components on the Esp32 IMU GPS

G.top015(Gms-g9)ESP32_Lolin32_LiteGY-9250

Esp32 IMU GPS bill of materials (BOM)

28 components, 12 distinct parts.

QtyPartRefs
1
G.top015(Gms-g9)
U1
1
ESP32_Lolin32_Lite
MOD1
1
GY-9250
MOD2
4
Conn_01x03_Female
J1, J2, J3, J4
8
_
JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
2
SW_Push_Dual
SW1, SW2
1
LED_Dual_AAKK
D1
1
LED
D2
1
600R 100MHz 200mA
FB1
1
1u
C1
1
100n
C2
6
330R
R1, R2, R3, R4, R5, R6

Esp32 IMU GPS design files

The KiCad project lives in the DamianPodrazaCode/KiCad-PRJ repository on GitHub; these links point at the commit this page was built from.

Esp32 IMU GPS: common questions

What microcontroller does the Esp32 IMU GPS use?

The Esp32 IMU GPS is built around the ESP32_Lolin32_Lite, from the ESP32 family.

How big is the Esp32 IMU GPS PCB?

The Esp32 IMU GPS measures 85 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32 IMU GPS?

28 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32 IMU GPS design files?

From the DamianPodrazaCode/KiCad-PRJ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32 IMU GPS design in my own project?

The repository has no license, so all rights stay with DamianPodrazaCode. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32 IMU GPS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in KiCad-PRJ

Similar boards