UTerm2-s exp
About the UTerm2-s exp PCB
UTerm2-s exp is an open source PCB design by DamianPodrazaCode, published on GitHub. It is a 2-layer board measuring 55 × 58 mm, with 17 components from 14 distinct parts.
Other key parts include the ESP-PSRAM32 and CH340G. By type, the board carries 6 capacitors, 4 connectors, 2 ICs, 2 resistors, 1 crystal and 1 fuse.
Main components on the UTerm2-s exp
UTerm2-s exp bill of materials (BOM)
17 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-PSRAM32 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | CH340G | SOP-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | 12MHz | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | Conn_01x16_Female | PinSocket_2x08_P2.54mm_Vertical | J1 |
| 1 | USB_B_Mini | USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
| 1 | SD_Card | SD_TE_2041021 | J3 |
| 1 | Conn_01x08_Female | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Fuse | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | L | L_1806_4516Metric_Pad1.45x1.90mm_HandSolder | L1 |
| 3 | 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C5 |
| 1 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 47u | CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C3 |
| 1 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 2 | 47k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
UTerm2-s exp design files
The KiCad project lives in the DamianPodrazaCode/KiCad-PRJ repository on GitHub; these links point at the commit this page was built from.
UTerm2-s exp: common questions
How big is the UTerm2-s exp PCB?
The UTerm2-s exp measures 55 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UTerm2-s exp?
17 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the UTerm2-s exp design files?
From the DamianPodrazaCode/KiCad-PRJ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the UTerm2-s exp design in my own project?
The repository has no license, so all rights stay with DamianPodrazaCode. Use it as a reference, and ask the author before reusing the design.
More boards in KiCad-PRJ
Skaner3d
175 × 90 mm52 parts2LNo license0
ESP32Esp32 IMU GPS
85 × 55 mm28 parts2LNo license0
Waga
160 × 80 mm25 parts2LNo license0
Usb usart CH340 full 3v3
40 × 40 mm20 parts2LNo license0
MPU6050 esp32Lolin
25.8 × 44.8 mm19 parts2LNo license0
Usb usart CH340 full 5v
40 × 40 mm18 parts2LNo license0
MPU6050
15.6 × 20.3 mm9 parts2LNo license0
Nucleo144 and 2.2 S6D0164 lcd parallel 16bit
100 × 70 mm8 parts2LNo license0
Nucleo144 and 2.2 ILI9341 lcd SPI
100 × 70 mm8 parts2LNo license0
Nucleo144 and 4.3 SSD1963 lcd parallel 16bit
100 × 70 mm5 parts2LNo license0