DiceMaster HW

DanielHou315·DiceMaster_HW·PCB/DiceMaster_Router/DiceMaster_Router.kicad_pcb

DiceMaster HW PCB layout, top view — open source Raspberry Pi board by DanielHou315

About the DiceMaster HW PCB

DiceMaster HW is an open source Raspberry Pi PCB design by DanielHou315, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 26 components from 18 distinct parts.

Its main chip is the RaspberryPiConnector, from the Raspberry Pi family. Other key parts include the TPS565201DDCR and BMI160_Breakout. By type, the board carries 2 ICs, 2 capacitors, 1 connector and 1 inductor.

From the project

Hardware & PCB Design for DiceMaster

Hardware design files for the DiceMaster project, using KiCad.

The current production board is PCB v1 (PCB/DiceMasterRouter/), finalized for production on 2026-04-05 (commit 4ef69b5, "finalized pcb v1 for prod"). Gerbers and the JLCPCB BOM under PCB/DiceMasterRouter/gerbers/ are from this run; the manufactured boards were received around mid-April 2026.

These issues were observed on the v1 boards but not yet root-caused:

Main components on the DiceMaster HW

TPS565201DDCRBMI160_Breakout

DiceMaster HW bill of materials (BOM)

26 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS565201DDCR
IC1
1
BMI160_Breakout
U1
1
RaspberryPiConnector
J1
1
100nF
C_BST1
3
22uF
C_OUT1, C_OUT2, C_OUT3
1
1N5819
D_FAN1
6
SM06B-GHS-TB
J_A1, J_B1, J_C1, J_D1, J_E1, J_F1
1
Conn_01x05
J_BTN1
1
Conn_01x02
J_FAN1
1
J_SW
J_SWITCH1
1
J_BAT
PiSugarPowerConnector1
1
2N7002
Q_FAN1
1
30.1k
R_BOT1
1
1kO
R_FG1
1
100kO
R_FPD1
1
100k
R_Top1
1
3.3uH
L1
2
22uF
C1, C3

DiceMaster HW design files

The KiCad project lives in the DanielHou315/DiceMaster_HW repository on GitHub; these links point at the commit this page was built from.

DiceMaster HW: common questions

What microcontroller does the DiceMaster HW use?

The DiceMaster HW is built around the RaspberryPiConnector, from the Raspberry Pi family.

How big is the DiceMaster HW PCB?

The DiceMaster HW measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DiceMaster HW?

26 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DiceMaster HW design files?

From the DanielHou315/DiceMaster_HW repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DiceMaster HW design in my own project?

The repository has no license, so all rights stay with DanielHou315. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DiceMaster HW without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards