TriggerFlow hard
daniellouvel·TriggerFlow-hard·kicad/module_capteur/module_capteur.kicad_sch
About the TriggerFlow hard PCB
TriggerFlow hard is an open source PCB design by daniellouvel, published on GitHub. It is a board, with 43 components from 25 distinct parts.
Other key parts include the TLV9062. By type, the board carries 17 resistors, 11 capacitors, 5 jumpers, 4 diodes, 3 connectors and 1 IC.
It belongs with the robotics & motion and iot & wireless designs in this gallery.
From the project
Boîtier de déclenchement généraliste pour photographie haute vitesse : détection multi-capteurs, moteur de règles programmable, pilotage de sorties variées (flash, électrovannes, moteur pas à pas, appareil photo, lumière/servo) et d'appareils secteur via des prises Wi-Fi.
Boîtier de déclenchement généraliste pour photographie haute vitesse : détection multi-capteurs, moteur de règles programmable, pilotage de sorties variées (flash, électrovannes, moteur pas à pas, appareil photo, lumière/servo) et d'appareils secteur via des prises Wi-Fi.
Contrôlable par USB (PC) et Wi-Fi/BLE (application mobile).
Statut (03/10/2026) : schéma saisi dans EasyEDA et validé netlist par netlist pour les Blocs 1, 2, 3, 5, 5b, 8, 10 et la feuille ESP32 (voir BOM-netlist.md). Blocs 4 (moteur) et 7 (PWM) : netlists prêtes, à saisir. Bloc 6 (relais) supprimé, remplacé par des prises…
Main components on the TriggerFlow hard
TriggerFlow hard bill of materials (BOM)
43 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV9062 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | GMI6027P | M1 | |
| 1 | CONTACT | CN1 | |
| 1 | PIEZO | CN2 | |
| 1 | RJ45 | J1 | |
| 1 | PIR AM312 | H1 | |
| 5 | 0R | JP1, JP2, JP3, JP4, JP5 | |
| 1 | BPW34 | D1 | |
| 2 | BAT54S | SOT-23 | D2, D3 |
| 1 | IR333C | D4 | |
| 1 | 10uF | C1 | |
| 5 | 100nF | C2, C4, C5, C10, C11 | |
| 4 | 1uF | C3, C7, C8, C9 | |
| 1 | Cf | C6 | |
| 1 | R_ID | R1 | |
| 2 | 100 | R2, R17 | |
| 5 | 10k | R3, R4, R5, R11, R13 | |
| 1 | 220 | R6 | |
| 1 | Rf | R7 | |
| 1 | Rg | R8 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1M | R9 | |
| 2 | 2.2k | R10, R15 | |
| 1 | 100k | R12 | |
| 1 | 1k | R14 | |
| 1 | 0R | R16 |
TriggerFlow hard design files
The KiCad project lives in the daniellouvel/TriggerFlow-hard repository on GitHub; these links point at the commit this page was built from.
TriggerFlow hard: common questions
How many components are on the TriggerFlow hard?
43 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the TriggerFlow hard design files?
From the daniellouvel/TriggerFlow-hard repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the TriggerFlow hard design in my own project?
The repository has no license, so all rights stay with daniellouvel. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979