6 open source boards using the TLV9062
Real designs built with the TLV9062, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
STM32-FOC-Control
Gokasimov
100 × 100 mm118 parts4LMIT2STM32
CNC Buck
JasonClock
60 × 60 mm78 parts4LNo license1AVR/Arduino
LoFence Hardware
Alex9779
72 × 133 mm56 parts2LMIT1E foc
embedded-pro
89.4 × 66.9 mm154 parts2LNo license0- schematic only · 43 parts
TriggerFlow hard
daniellouvel
43 partsNo license0 Current Sensor
aykutozdemir
60 × 40 mm19 parts2LNo license0
How designs wire the TLV9062
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV9062 connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 5 of 5 designs, most often 100 kΩ (then 1 kΩ).
- The V- pin is tied to GND on 5 of 5 designs.
- Pin 1 has a series resistor on 4 of 5 designs, most often 22 Ω (then 12 kΩ).
- The + pins have a series resistor on 4 of 5 designs, most often 1 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| -pin 2, 6 | Connected to: Signal 80% · not connected 20% |
|
| +pin 3, 5 | Connected to: Signal 80% · not connected 20% |
|
| V-pin 4 | Connected to: GND 100% | — |
| V+pin 8 | Connected to: 3.3V 80% · a signal 20% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32-FOC-Control by Gokasimov, LoFence Hardware by Alex9779, CNC Buck by JasonClock and Current Sensor by aykutozdemir.
The TLV9062 in open source designs
The gallery holds 6 open source boards using the TLV9062 from 6 GitHub repositories; a typical one measures about 72 × 66.9 mm and carries around 67 components.
60% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is STM32-FOC-Control by Gokasimov.
Parts used alongside the TLV9062
Microcontrollers on boards using the TLV9062
What boards using the TLV9062 are built for
TLV9062: common questions
Where can I find a TLV9062 reference design?
Each of the 6 boards on this page is a real design using the TLV9062. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLV9062 - pin?
The - pins have a series resistor on 5 of 5 designs, most often 100 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the TLV9062.
How is the TLV9062 V- pin connected?
The V- pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV9062.
What resistor goes on the TLV9062 pin 1?
Pin 1 has a series resistor on 4 of 5 designs, most often 22 Ω (then 12 kΩ). Counted from the KiCad layouts of 5 open source designs using the TLV9062.
Which microcontrollers do boards using the TLV9062 use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the TLV9062?
The median is 72 × 66.9 mm, and 60% are two-layer designs.
What is the most popular open source board using the TLV9062?
By GitHub stars, STM32-FOC-Control by Gokasimov, with 2 stars.
Can I simulate one of these boards using the TLV9062 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.