HardLabs

RGB PANNEL

dannyandreev·32x32-Matrix·Fiverr/ali/New folder/RGB PANNEL/RGB PANNEL.kicad_pcb

RGB PANNEL PCB layout, top view — open source ESP32 board by dannyandreev

About the RGB PANNEL PCB

RGB PANNEL is an open source ESP32 PCB design by dannyandreev, published on GitHub. It is a 2-layer board measuring 71.1 × 61 mm, with 5 components from 5 distinct parts.

Its main chip is the ESP32S, from the ESP32 family. By type, the board carries 4 connectors and 1 IC.

It belongs with the iot & wireless designs in this gallery.

From the project

Setup from clean Windows: Install Git: https://gitforwindows.org/ Install VSCode: https://code.visualstudio.com/Download Install Python: https://www.python.org/downloads/release/python-3121/ Debug PIP: https://stackoverflow.com/questions/37220055/pip-fatal-error-in-launcher-unabl

Setup from clean Windows: Install Git: https://gitforwindows.org/ Install VSCode: https://code.visualstudio.com/Download Install Python: https://www.python.org/downloads/release/python-3121/ Debug PIP: https://stackoverflow.com/questions/37220055/pip-fatal-error-in-launcher-unable-to-create-process-using Install MicroPython: https://docs.micropython.org/en/latest/esp32/tutorial/intro.html Install Pymakr: https://lemariva.com/blog/2018/12/micropython-visual-studio-code-as-ide#:~:text=To%20use%20VSCode%20for%20MicroPython,build%2Din%20command%20line%20REPL. Install Node: https://nodejs.org/en/…

Main components on the RGB PANNEL

ESP32S

RGB PANNEL bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
ESP32S
U1
1
Conn_01x06
J1
1
DISPLAY MODULE
J2
1
SD CARD MODULE
J3
1
LSM6DS3
J4

RGB PANNEL design files

The KiCad project lives in the dannyandreev/32x32-Matrix repository on GitHub; these links point at the commit this page was built from.

RGB PANNEL: common questions

What microcontroller does the RGB PANNEL use?

The RGB PANNEL is built around the ESP32S, from the ESP32 family.

How big is the RGB PANNEL PCB?

The RGB PANNEL measures 71.1 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RGB PANNEL?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the RGB PANNEL design files?

From the dannyandreev/32x32-Matrix repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RGB PANNEL design in my own project?

The repository has no license, so all rights stay with dannyandreev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RGB PANNEL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in 32x32-Matrix

Similar boards