SemesterProjectHybridSensingSystem

dariobozinovski·SemesterProjectHybridSensingSystem·open_echo-main/development/TUSS4470_shield_02/TUSS4470_shield/TUSS4470_shield.kicad_pcb

SemesterProjectHybridSensingSystem PCB layout, top view — open source STM32 board by dariobozinovski

About the SemesterProjectHybridSensingSystem PCB

SemesterProjectHybridSensingSystem is an open source STM32 PCB design by dariobozinovski, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 49 components from 45 distinct parts.

Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the AMS1117-3.3, CP2102N-A01-GQFN28 and TUSS4470TRTJR. By type, the board carries 22 capacitors, 12 resistors, 6 diodes, 4 ICs, 2 crystals and 1 connector.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Code Used duing the Semester Project

Main components on the SemesterProjectHybridSensingSystem

SemesterProjectHybridSensingSystem bill of materials (BOM)

49 components, 45 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
TUSS4470TRTJR
U1
1
STM32F103C8TX
AMS1117-3.3
U2
1
CP2102N-A01-GQFN28
U3
1
TUSS4470TRTJR
STM32F103C8Tx
U4
1
Crystal
Y1
1
Crystal
Y2
1
USB_B_Mini
J8
1
termination_jumper
JP7
1
RST
SW2
1
LED_PC13
1N4001
D1
1
C2128
LED_PWR
D2
1
C8678
LED_PC13
D5
1
TX
D6
1
C2297
LED_3.3V_PWR
D7
1
RX
D8
1
C14663
C15nF
C1
1
C10UF
C106nF
C2
1
C100NF
C3.2nF
C3
1
C22PF
C21.2nF
C4
1
C22PF
40V, 330pF
C5
Show 25 more
QtyPartRefs
1
C100NF
40V, 2µF
C6
1
C100NF
50V, 100nF
C7
1
C14663
10nF
C8
1
C100NF
C100nF
C11
1
C10NF
C47uF
C12
1
C1NF
C100nF
C16
1
C2.2NF
C47uF
C17
2
C14663
C100nF
C21, C23
1
C47NF
C100nF
C22
1
C10UF
C100nF
C24
1
C50254
C100nF
C25
2
C22pF
C26, C27
1
C100NF
C100nF
C28
2
C22UF
C100nF
C29, C30
1
R1M
R10
R1
1
R1K
R200
R2
1
R10K
R330
R3
2
R330
R1k
R7, R8
1
R10K
R1k
R9
1
R1K
R330
R10
1
R10
R330
R11
1
R4.7K
R330
R12
1
R200
R10k
R13
1
R1K
R10k
R14
1
R100K
R1M
R15

SemesterProjectHybridSensingSystem design files

The KiCad project lives in the dariobozinovski/SemesterProjectHybridSensingSystem repository on GitHub; these links point at the commit this page was built from.

SemesterProjectHybridSensingSystem: common questions

What microcontroller does the SemesterProjectHybridSensingSystem use?

The SemesterProjectHybridSensingSystem is built around the STM32F103C8TX, from the STM32 family.

How big is the SemesterProjectHybridSensingSystem PCB?

The SemesterProjectHybridSensingSystem measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SemesterProjectHybridSensingSystem?

49 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SemesterProjectHybridSensingSystem design files?

From the dariobozinovski/SemesterProjectHybridSensingSystem repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SemesterProjectHybridSensingSystem design in my own project?

The repository has no license, so all rights stay with dariobozinovski. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SemesterProjectHybridSensingSystem without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards