43 open source boards using the CP2102N-A01-GQFN28
Real designs built with the CP2102N-A01-GQFN28, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Womo
muccc
254.9 × 150.1 mm532 parts4LGPL-3.084ESP32
Sony scopeman
lucysrausch
53.5 × 101.8 mm135 parts2LNo license69ESP32
Ble stepper motor analyzer
zapta
38.5 × 43 mm58 parts2LNo license58ESP32
E-ink screen
TDA-2030
65 × 30 mm55 parts2LApache-2.033STM32
FastLOGIC
Neumi
123 × 87.5 mm181 parts4LMIT23ESP32
ESP32-Development-Board
jminjares4
28.5 × 53.7 mm36 parts2LNo license21ESP32
Fluepdot
Fluepke
70 × 65 mm111 parts2LAGPL-3.017ESP8266
ESP-Hiro
Chrismettal
100 × 50 mm79 parts2LGPL-3.015STM32
Mad navigator
maddevsio
173.4 × 82.6 mm104 parts2LNo license14ESP32
Esp32
sourabhmisal
151.1 × 100.3 mm40 parts2LCC0-1.012STM32
CMM2-JLC
Manawyrm
130 × 102 mm110 parts2LGPL-3.010ESP32
KlokTHREEjr
wyolum
162.6 × 194.3 mm273 parts2LNo license5ESP32
Time2time
Resaj
50 × 70 mm80 parts2LNo license5ESP32
ClockIOT
wyolum
162.6 × 194.3 mm282 parts2LMIT4ESP32
Prototype Rev-
DiegoBriceno03
59.9 × 66.3 mm104 parts2LNo license3ESP32
Esp32c3 devboard
tmilkovic51
47 × 34 mm69 parts4LCERN-OHL-P-2.03AVR/Arduino
Inuino
aiex718
68.6 × 53.3 mm58 parts2LLGPL-2.13FPGA
ZYNQ7020 Development Board
dj140
86 × 69 mm121 parts4LNo license2RA-01-LoRa
SpyrosCpt
71.5 × 83.7 mm67 parts2LNo license2Mpcie gnss
neggles
30 × 51 mm27 partsCC-BY-SA-4.02- schematic only · 44 partsESP32
Deskbuddy
FECstudios
44 partsApache-2.02 ESP32
Final project circ 1
c3n3
100.5 × 100 mm90 parts2LNo license1Jantteri right
OJ2016
63.8 × 63.8 mm89 parts2LNo license1ESP8266
Neatboard esp8266
galjonsfigur
28 × 34.2 mm49 parts2LMIT1ESP32
Luefterklappensteuerung
realraum
80 × 87.6 mm115 parts4LNo license0ESP32
Marionette
Magma-Space
80 × 80 mm97 parts4LNo license0ESP32
EmbeddedSystemKit
bostang
123.3 × 61 mm73 parts4LNo license0ESP32
Proj kicad esp32 energy consumption
rdalla
54 × 38 mm50 parts2LNo license0STM32
SemesterProjectHybridSensingSystem
dariobozinovski
50 × 50 mm49 parts2LNo license0ESP32
ESP32bot
Storby42
110 × 171 mm44 parts2LCustom license0ESP32
-ESP32-using
bhumijainn
151.1 × 100.3 mm40 parts2LNo license0ESP32
ESP32-DevKit-Custom
chackojose2005-zodiac
30.4 × 56.5 mm34 parts4LMIT0AVR/Arduino
ATmega328PB-usb bread board
asukiaaa
60 × 60 mm29 parts2LNo license0ESP32
K3jr controller
wyolum
161.3 × 40.6 mm70 parts2LNo license5ESP32
Test
DiegoBriceno03
70.6 × 66.3 mm104 parts2LNo license3STM32
Jantteri motor pwr
OJ2016
137.7 × 45 mm72 parts2LNo license1
How designs wire the CP2102N-A01-GQFN28
Read from the KiCad layouts of 33 open source designs, one per repository: what each pin of the CP2102N-A01-GQFN28 connects to, and the resistors, capacitors and other passives placed on it.
- The REGIN pin has a decoupling capacitor on 26 of 32 designs, most often 100 nF (then 4.7 µF).
- The DCD pin is left unconnected on 31 of 33 designs (a signal on 2).
- The RI/CLK pin is left unconnected on 31 of 33 designs.
- The SUSPEND pin is left unconnected on 31 of 32 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DCDpin 1 | Connected to: Not connected 94% | — |
| RI/CLKpin 2 | Connected to: Not connected 94% | — |
| GNDpin 3, 29 | Connected to: GND 98% | — |
| VDDpin 6 | Connected to: 3.3V 64% · a signal 30% |
|
| REGINpin 7 | Connected to: 3.3V 78% · a signal 19% |
|
| VBUSpin 8 | Connected to: Signal 53% · 5V 47% |
|
| RSTBpin 9 | Connected to: Signal 69% · not connected 28% |
|
| NCpin 10 | Connected to: Not connected 100% | — |
| SUSPENDBpin 11 | Connected to: Not connected 63% · a signal 38% | — |
| SUSPENDpin 12 | Connected to: Not connected 97% | — |
| CHRENpin 13 | Connected to: Not connected 97% | — |
| CHR1pin 14 | Connected to: Not connected 97% | — |
| CHR0pin 15 | Connected to: Not connected 97% | — |
| WAKEUP/GPIO.3pin 16 | Connected to: Not connected 97% | — |
| RS485/GPIO.2pin 17 | Connected to: Not connected 97% | — |
| RXT/GPIO.1pin 18 | Connected to: Not connected 94% | — |
| TXT/GPIO.0pin 19 | Connected to: Not connected 94% | — |
| GPIO.6pin 20 | Connected to: Not connected 100% | — |
| GPIO.5pin 21 | Connected to: Not connected 100% | — |
| GPIO.4pin 22 | Connected to: Not connected 100% | — |
| CTSpin 23 | Connected to: Not connected 81% · a signal 19% | — |
| RTSpin 24 | Connected to: Signal 65% · not connected 35% |
|
| RXDpin 25 | Connected to: The microcontroller 29%, a connector 23% |
|
| TXDpin 26 | Connected to: The microcontroller 23% |
|
| DSRpin 27 | Connected to: Not connected 100% | — |
| DTRpin 28 | Connected to: Signal 81% · not connected 19% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Womo by muccc, Sony scopeman by lucysrausch, Ble stepper motor analyzer by zapta and E-ink screen by TDA-2030.
The CP2102N-A01-GQFN28 in open source designs
The gallery holds 43 open source boards using the CP2102N-A01-GQFN28 from 35 GitHub repositories; a typical one measures about 71.1 × 64.2 mm and carries around 67 components.
80% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Womo by muccc.
Parts used alongside the CP2102N-A01-GQFN28
Microcontrollers on boards using the CP2102N-A01-GQFN28
What boards using the CP2102N-A01-GQFN28 are built for
CP2102N-A01-GQFN28: common questions
Where can I find a CP2102N-A01-GQFN28 reference design?
Each of the 43 boards on this page is a real design using the CP2102N-A01-GQFN28. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CP2102N-A01-GQFN28 REGIN pin?
The REGIN pin has a decoupling capacitor on 26 of 32 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 33 open source designs using the CP2102N-A01-GQFN28.
How is the CP2102N-A01-GQFN28 DCD pin connected?
The DCD pin is left unconnected on 31 of 33 designs (a signal on 2). Counted from the KiCad layouts of 33 open source designs using the CP2102N-A01-GQFN28.
How is the CP2102N-A01-GQFN28 RI/CLK pin connected?
The RI/CLK pin is left unconnected on 31 of 33 designs. Counted from the KiCad layouts of 33 open source designs using the CP2102N-A01-GQFN28.
What parts are used alongside the CP2102N-A01-GQFN28?
The AMS1117-3.3, ESP32-WROOM-32, ESP32-WROOM-32D, NCP1117-3.3_TO252 and 1117-33 appear in the most repositories here.
Which microcontrollers do boards using the CP2102N-A01-GQFN28 use?
Most are built on ESP32 (24), STM32 (6), AVR/Arduino (4) and ESP8266 (2).
How big is a typical board using the CP2102N-A01-GQFN28?
The median is 71.1 × 64.2 mm, and 80% are two-layer designs.
What is the most popular open source board using the CP2102N-A01-GQFN28?
By GitHub stars, Womo by muccc, with 84 stars.
Can I simulate one of these boards using the CP2102N-A01-GQFN28 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.