Capteur
About the Capteur PCB
Capteur is an open source PCB design by Darkzveller, published on GitHub. It is a 2-layer board measuring 22 × 15.5 mm, with 4 components from 4 distinct parts.
Other key parts include the CNY70. By type, the board carries 2 resistors, 1 IC and 1 connector.
Main components on the Capteur
Capteur bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CNY70 | Vishay_CNY70 | U1 |
| 1 | Autocom3 | Autocom3 | J1 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 5.6k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
Capteur design files
The KiCad project lives in the Darkzveller/CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL repository on GitHub; these links point at the commit this page was built from.
Capteur: common questions
How big is the Capteur PCB?
The Capteur measures 22 × 15.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Capteur?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Capteur design files?
From the Darkzveller/CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Capteur design in my own project?
The repository has no license, so all rights stay with Darkzveller. Use it as a reference, and ask the author before reusing the design.
More boards in CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL
Carte puissance crac
67.1 × 123.5 mm51 parts2LNo license0
Carte Batterie 2023
100 × 80 mm24 parts2LNo license0
Carte IHM
105 × 72 mm20 parts2LNo license0
Herkulex
68 × 68 mm20 parts2LNo license0
ESP32WifiCAN
48 × 28 mm17 parts2LNo license0
ESP32Panel ESP32
95 × 60 mm14 parts2LNo license0
ESP32CarteMoteurs
51.3 × 65 mm13 parts2LNo license0
Crac as5047
20 × 20 mm4 parts2LNo license0