HardLabs

CarteMoteurs

Darkzveller·CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL·CodeBaseRoulanteOTA/Kicad/carteMoteurs/carteMoteurs.kicad_pcb

CarteMoteurs PCB layout, top view — open source ESP32 board by Darkzveller

About the CarteMoteurs PCB

CarteMoteurs is an open source ESP32 PCB design by Darkzveller, published on GitHub. It is a 2-layer board measuring 51.3 × 65 mm, with 13 components from 6 distinct parts.

Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. Other key parts include the MCP2562FDT-E/SN and POLOLU-2507. By type, the board carries 6 capacitors, 3 ICs, 2 connectors and 2 jumpers.

Main components on the CarteMoteurs

MCP2562FDT-E/SNESP32-DEVKITC-32DPOLOLU-2507

CarteMoteurs bill of materials (BOM)

13 components, 6 distinct parts.

QtyPartRefs
1
MCP2562FDT-E/SN
U1
1
ESP32-DEVKITC-32D
U2
1
POLOLU-2507
U3
2
Autocom4
J1, J2
2
7-188275-8
Micromatch 8
JP2, JP3
6
100nF
C1, C2, C3, C4, C5, C6

CarteMoteurs design files

The KiCad project lives in the Darkzveller/CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL repository on GitHub; these links point at the commit this page was built from.

CarteMoteurs: common questions

What microcontroller does the CarteMoteurs use?

The CarteMoteurs is built around the ESP32-DEVKITC-32D, from the ESP32 family.

How big is the CarteMoteurs PCB?

The CarteMoteurs measures 51.3 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CarteMoteurs?

13 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the CarteMoteurs design files?

From the Darkzveller/CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CarteMoteurs design in my own project?

The repository has no license, so all rights stay with Darkzveller. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CarteMoteurs without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL

Similar boards