Panel ESP32
About the Panel ESP32 PCB
Panel ESP32 is an open source ESP32 PCB design by Darkzveller, published on GitHub. It is a 2-layer board measuring 95 × 60 mm, with 14 components from 12 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. By type, the board carries 7 connectors, 3 capacitors, 1 IC, 1 transistor, 1 diode and 1 resistor.
Main components on the Panel ESP32
Panel ESP32 bill of materials (BOM)
14 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U2 |
| 1 | IRL510 | TO-220-3_Horizontal_TabDown | Q1 |
| 2 | Omnimate2 | OmnimateSL-5,08_1x02_P5.08mm_Vertical | J1, J3 |
| 1 | Autocom3 | Autocom3 | J2 |
| 1 | HE10_02x08 | HE10_2x08_P2.54mm | J4 |
| 1 | Autocom5 | Autocom5 | J5 |
| 1 | 5788336-1 | TE_5788336-1 | J6 |
| 1 | Autocom2 | Autocom2 | J7 |
| 1 | UF304 | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | Cp | CP_Radial_D10.0mm_P5.00mm | C1 |
| 2 | C | C_Rect_L7.0mm_W2.5mm_P5.00mm | C2, C3 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Panel ESP32 design files
The KiCad project lives in the Darkzveller/CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL repository on GitHub; these links point at the commit this page was built from.
Panel ESP32: common questions
What microcontroller does the Panel ESP32 use?
The Panel ESP32 is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the Panel ESP32 PCB?
The Panel ESP32 measures 95 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panel ESP32?
14 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Panel ESP32 design files?
From the Darkzveller/CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Panel ESP32 design in my own project?
The repository has no license, so all rights stay with Darkzveller. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Panel ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in CodeBaseRoulante_ESP32E_CRAC-TEAM-PERSONNAL
Carte puissance crac
67.1 × 123.5 mm51 parts2LNo license0
Carte Batterie 2023
100 × 80 mm24 parts2LNo license0
Herkulex
68 × 68 mm20 parts2LNo license0
Carte IHM
105 × 72 mm20 parts2LNo license0
ESP32WifiCAN
48 × 28 mm17 parts2LNo license0
ESP32CarteMoteurs
51.3 × 65 mm13 parts2LNo license0
Capteur
22 × 15.5 mm4 parts2LNo license0
Crac as5047
20 × 20 mm4 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k