Project-05-Worker-Safety-Helmet
About the Project-05-Worker-Safety-Helmet PCB
Project-05-Worker-Safety-Helmet is an open source ESP32 PCB design by Darshan7052006, published on GitHub. It is a 2-layer board measuring 60.1 × 41.4 mm, with 15 components from 10 distinct parts.
Its main chip is the ESP32 LEFT CONNECTOR, from the ESP32 family. By type, the board carries 7 connectors, 7 resistors and 1 transistor.
It belongs with the sensors and power & battery designs in this gallery.
From the project
Collection of PCB designs created using KiCad. Includes power supplies, embedded systems, sensor boards, and hardware projects with schematics, PCB layouts, manufacturing files, and documentation.
This repository contains PCB designs created using KiCad as part of my learning journey in electronics and embedded systems.
- Project 01 – Power Supply PCB - Project 02 – Tiny Solar Power Supply - Project 03 – MCU Debugger PCB - More projects coming soon...
- Schematic - PCB Layout - Gerber Files - Bill of Materials (BOM) - 3D Render - Project Documentation
Project-05-Worker-Safety-Helmet bill of materials (BOM)
15 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TRANSISTOR | TO-92_Inline | Q1 |
| 1 | ESP32 LEFT CONNECTOR | PinSocket_1x15_P2.54mm_Vertical | J1 |
| 1 | ESP32 RIGHT CONNECTOR | PinSocket_1x15_P2.54mm_Vertical | J2 |
| 1 | DHT11 CONNECTOR | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ULTRASONIC SENSOR CONNECTOR | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | BUZZER CONNECTOR | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | MQ-2 CONNECTOR | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | MPU6050-CONNECTOR | PinHeader_1x05_P2.54mm_Vertical | J8 |
| 6 | 10kohms | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 1 | 1kohms | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
Project-05-Worker-Safety-Helmet design files
The KiCad project lives in the Darshan7052006/PCB-Design-Projects repository on GitHub; these links point at the commit this page was built from.
Project-05-Worker-Safety-Helmet: common questions
What microcontroller does the Project-05-Worker-Safety-Helmet use?
The Project-05-Worker-Safety-Helmet is built around the ESP32 LEFT CONNECTOR, from the ESP32 family.
How big is the Project-05-Worker-Safety-Helmet PCB?
The Project-05-Worker-Safety-Helmet measures 60.1 × 41.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Project-05-Worker-Safety-Helmet?
15 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Project-05-Worker-Safety-Helmet design files?
From the Darshan7052006/PCB-Design-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Project-05-Worker-Safety-Helmet design in my own project?
The repository has no license, so all rights stay with Darshan7052006. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Project-05-Worker-Safety-Helmet without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in PCB-Design-Projects
ESP32Project-04-Predictive-Maintenance system
53.3 × 59.6 mm31 parts4LNo license0
AVR/Arduino${project name}
49.2 × 33.5 mm25 parts2LNo license0
BreadboardPowerSupply
29.7 × 53.6 mm17 parts2LNo license0
Project-02-Solar-Power-Supply
39.1 × 20.3 mm16 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k