CapacitorBank
darshp848·open-actuator-drive·hardware/capacitor-bank/CapacitorBank.kicad_pcb
About the CapacitorBank PCB
CapacitorBank is an open source PCB design by darshp848, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 101.6 × 25.4 mm, with 15 components from 3 distinct parts.
By type, the board carries 12 capacitors, 2 resistors and 1 connector.
From the project
Unvalidated actuator-control PCB designs, KiCad fabrication files and board simulations
This two-layer, 101.6 × 25.4 mm board puts twelve 130 µF, 80 V capacitors across the DC bus for 1,560 µF nominal, with a 10 kΩ bleeder. The KiCad project includes the custom footprints and a simplified capacitor body. See the parts list, schematic PDF and Gerber and drill ZIP.
The layout is routed. KiCad 10.0.7 reported zero DRC findings, unconnected items, schematic mismatches and ERC findings. Footprint fit and polarity, assembly, bus ripple, inrush, discharge time and temperature rise still need verification on hardware.
CapacitorBank bill of materials (BOM)
15 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Paired inverter supply leads | PowerWire_P8 | J1 |
| 12 | B40910A0137M000 130 uF / 80 V | TDK_B40910_10x16p5_DRAFT | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 2 | 10 kR / 0.5 W | Bleeder_2512 | R1, R2 |
CapacitorBank design files
The KiCad project lives in the darshp848/open-actuator-drive repository on GitHub; these links point at the commit this page was built from.
CapacitorBank: common questions
How big is the CapacitorBank PCB?
The CapacitorBank measures 101.6 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CapacitorBank?
15 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CapacitorBank design files?
From the darshp848/open-actuator-drive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CapacitorBank design in my own project?
Yes, under the terms of its Apache-2.0 license, which darshp848 chose for the repository.
More boards in open-actuator-drive
Power split placement draft
darshp848
71.3 × 71.5 mm146 parts6LApache-2.01ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE
darshp848
180 × 45 mm132 parts2LApache-2.01BrakeResistor
darshp848
190 × 38 mm7 parts2LApache-2.01DF40 Receptacle Breakout
darshp848
99.5 × 80 mm3 parts2LApache-2.01DF40 Header Breakout
darshp848
99.5 × 80 mm3 parts2LApache-2.01