ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE
darshp848·open-actuator-drive·hardware/support-board/SupportBoard.kicad_pcb
About the ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE
ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE is an open source PCB design by darshp848, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 180 × 45 mm, with 132 components from 74 distinct parts.
Other key parts include the LM5069MM-2/NOPB, TLV3201AIDBVR, REF3312AIDBZR, SN74LVC1G32DBVR and UCC27517DBVT. By type, the board carries 46 capacitors, 43 resistors, 14 diodes, 11 ICs, 9 transistors and 6 connectors.
From the project
Unvalidated actuator-control PCB designs, KiCad fabrication files and board simulations
One board per arm. It handles input hot-swap and precharge, bulk capacitance, two power/CAN chain ports, housekeeping power, the brake chopper and controlled discharge. The brake resistor strip connects to J4 for BUS+ and BRK_SW and to J6 for the thermostat.
- KiCad project and parts list - Schematic PDF - Front and back copper review PDF - Gerber and drill ZIP
Main components on the ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE
ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE bill of materials (BOM)
132 components, 74 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM5069MM-2/NOPB | VSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | TLV3201AIDBVR | SOT-23-5 | U3 |
| 1 | REF3312AIDBZR | SOT-23 | U4 |
| 1 | SN74LVC1G32DBVR | SOT-23-5 | U5 |
| 1 | UCC27517DBVT UCC27517DBVR | SOT-23-5 | U6 |
| 1 | LT8631EFE#PBF | Analog_FE20-16_TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.74x3.86mm | U7 |
| 1 | MCP1703AT-3302E/TT | SOT-23 | U8 |
| 1 | LTC4359IMS8#PBF | MSOP-8_3x3mm_P0.65mm | U9 |
| 1 | LR8N8-G | SOT-89-3 | U10 |
| 2 | TPS3700DDCR | TSOT-23-6 | U11, U12 |
| 2 | CSD19536KTTT CSD19536KTT | TO-263-2 | Q1, Q2 |
| 3 | BSC040N10NS5ATMA1 | TDSON-8-1 | Q3, Q7, Q8 |
| 4 | BSS138 | SOT-23 | Q4, Q5, Q6, Q9 |
| 1 | XT90PW-M XT90PW-M battery | AMASS_XT90PW-M_1x02_P10.90mm_Horizontal | J1 |
| 2 | XT30PW(2+2)-M.G.B XT30PW(2+2)-M chain | XT30PW22M | J2, J3 |
| 1 | BRAKE RESISTOR | PowerWire_P8 | J4 |
| 1 | B2B-PH-K-S RUN (close to run) | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | B2B-PH-K-S THERMOSTAT (NC) | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 2 | CSS2H-2512K-1L80FE 1.8m 1% 3W | R_2512_6332Metric | RS1, RS2 |
| 1 | SMCJ58A-M3/57T SMCJ58A | D_SMC | D1 |
Show 54 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | V10P10-M3/86A | TO-277A | D2 |
| 2 | SS1H10-E3/61T SS1H10 | D_SMA | D3, D4 |
| 1 | 150060GS75000 green PGD | LED_0603_1608Metric | D5 |
| 1 | 150060RS75000 red BRAKE | LED_0603_1608Metric | D6 |
| 1 | BZT52C12-7-F BZT52C12 | D_SOD-123 | D7 |
| 1 | SMAT70A | D_SMA | D8 |
| 1 | BZT52C10-7-F BZT52C10 | D_SOD-123 | D9 |
| 1 | BAT54WS-7-F BAT54WS | D_SOD-323 | D11 |
| 4 | 1N5819HW-7-F 1N5819HW | D_SOD-123 | D12, D13, D14, D15 |
| 1 | IHLP2525CZER220M8A 22uH | L_Vishay_IHLP-2525 | L1 |
| 5 | GRM32ER72A105KA01L 1uF 100V | C_1210_3225Metric | C1, C32, C33, C34, C35 |
| 1 | C0603C153K5RACTU 15nF | C_0603_1608Metric | C2 |
| 1 | C0603C473K1RACTU 47nF 100V | C_0603_1608Metric | C3 |
| 12 | B40910A0137M000 130uF 80V | TDK_B40910_10x16p5_DRAFT | C20, C21, C22, C23, C24, C25, C26, C27 +4 |
| 1 | GRM188R71H472KA01D 4.7nF | C_0603_1608Metric | C36 |
| 2 | GRM155R71H102KA01D 1nF | C_0402_1005Metric | C38, C64 |
| 7 | GCM155R71E104KE02D 0.1uF | C_0402_1005Metric | C40, C43, C46, C47, C63, C65, C66 |
| 3 | C1608X7R1E105K080AE 1uF | C_0603_1608Metric | C41, C42, C58 |
| 2 | GCM155R71E104KE02D 0.1uF 25V | C_0402_1005Metric | C44, C54 |
| 3 | C1608X7R1E105K080AE 1uF 25V | C_0603_1608Metric | C45, C57, C62 |
| 1 | GRM32ER72A225KA35L 2.2uF 100V | C_1210_3225Metric | C50 |
| 2 | GCJ188R72A104KA01D 0.1uF 100V | C_0603_1608Metric | C51, C61 |
| 1 | C1608X7R1C225K080AC 2.2uF 16V | C_0603_1608Metric | C52 |
| 1 | GRM155R71H103KA88D 10nF | C_0402_1005Metric | C53 |
| 1 | GRM1555C1H4R7CA01D 4.7pF | C_0402_1005Metric | C55 |
| 1 | C3225X7R1E226M250AB 22uF 25V | C_1210_3225Metric | C56 |
| 1 | 875575961005 33uF 100V | CP_Elec_10x12.6 | C59 |
| 1 | EEE-FN2A470UP 47uF 100V | CP_Elec_10x10.5 | C60 |
| 4 | RC0603FR-0710RL 10R | R_0603_1608Metric | R3, R4, R33, R34 |
| 2 | RC0603FR-0771K5L 71.5k 1% | R_0603_1608Metric | R5, R7 |
| 1 | RC0603FR-0710K7L 10.7k 1% | R_0603_1608Metric | R6 |
| 1 | RC0603FR-073K16L 3.16k 1% | R_0603_1608Metric | R8 |
| 1 | RC0603FR-0727K4L 27.4k 1% | R_0603_1608Metric | R9 |
| 2 | RC0603FR-071KL 1k | R_0603_1608Metric | R10, R35 |
| 3 | RC0402FR-07100KL 100k | R_0402_1005Metric | R11, R37, R49 |
| 2 | RC0402FR-071KL 1k | R_0402_1005Metric | R12, R27 |
| 2 | RC2512FK-0710KL 10k 0.5W | R_2512_6332Metric | R13, R14 |
| 2 | RC0603FR-0760R4L 60.4R | R_0603_1608Metric | R15, R16 |
| 2 | TNPW0603150KBETA 150k 0.1% | R_0603_1608Metric | R20, R21 |
| 1 | TNPW06036K81BETA 6.81k 0.1% | R_0603_1608Metric | R22 |
| 2 | TNPW0603237KBETA 237k 0.1% | R_0603_1608Metric | R23, R24 |
| 1 | RC0603FR-074R7L 4.7R | R_0603_1608Metric | R25 |
| 5 | RC0402FR-0710KL 10k | R_0402_1005Metric | R26, R30, R31, R32, R48 |
| 1 | RC0805FR-071ML 1M 1% | R_0805_2012Metric | R36 |
| 1 | RC0402FR-0725K5L 25.5k 1% | R_0402_1005Metric | R40 |
| 1 | RC0402FR-071ML 1M 1% | R_0402_1005Metric | R41 |
| 1 | RC0402FR-0771K5L 71.5k 1% | R_0402_1005Metric | R42 |
| 1 | RC0603FR-072K4L 2.4k 1% | R_0603_1608Metric | R43 |
| 1 | RC0603FR-0717K4L 17.4k 1% | R_0603_1608Metric | R44 |
| 2 | TNPW0805750KBEEA 750k 0.1% | R_0805_2012Metric | R45, R46 |
| 1 | TNPW06039K88BEEA 9.88k 0.1% | R_0603_1608Metric | R47 |
| 1 | TNPW0603255KBEEA 255k 0.1% | R_0603_1608Metric | R50 |
| 1 | TNPW060310K0BEEA 10k 0.1% | R_0603_1608Metric | R51 |
| 1 | RC0402FR-07150KL 150k | R_0402_1005Metric | R52 |
ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE design files
The KiCad project lives in the darshp848/open-actuator-drive repository on GitHub; these links point at the commit this page was built from.
ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE: common questions
How big is the ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE?
The ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE measures 180 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE?
132 components, from 74 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE design files?
From the darshp848/open-actuator-drive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ACTUATOR SUPPORT BOARD - UNVALIDATED PROTOTYPE design in my own project?
Yes, under the terms of its Apache-2.0 license, which darshp848 chose for the repository.
More boards in open-actuator-drive
Power split placement draft
darshp848
71.3 × 71.5 mm146 parts6LApache-2.01CapacitorBank
darshp848
101.6 × 25.4 mm15 parts2LApache-2.01BrakeResistor
darshp848
190 × 38 mm7 parts2LApache-2.01DF40 Receptacle Breakout
darshp848
99.5 × 80 mm3 parts2LApache-2.01DF40 Header Breakout
darshp848
99.5 × 80 mm3 parts2LApache-2.01