DF40 Header Breakout

darshp848·open-actuator-drive·hardware/df40-breakouts/DF40_Header_Breakout/DF40_Header_Breakout.kicad_pcb

DF40 Header Breakout layout, top view — open source board by darshp848

About the DF40 Header Breakout

DF40 Header Breakout is an open source PCB design by darshp848, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 99.5 × 80 mm, with 3 components from 2 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Unvalidated actuator-control PCB designs, KiCad fabrication files and board simulations

Two bench breakouts for the X1 two-story stack. The stack has one board-to-board connector, J_STACK1, a Hirose DF40 80-contact pair at 0.4 mm pitch:

The other connectors in the X1 projects (XT30/XT90, JST GH/ZR/PH, 1.27 and 2.54 mm pin headers) are cable or debug connectors, not mezzanines.

No off-the-shelf DF40 80-pin to 0.1" breakout was found (2026-11-01 search: distributor listings, Tindie, OSH Park; the only DF40 breakout found is a 30-pin OSH Park project), so these are custom.

DF40 Header Breakout bill of materials (BOM)

3 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XT90PW-M
DF40C-80DP-0.4V(51)
J1
2
Conn_02x20 2.54mm
J2, J3

DF40 Header Breakout design files

The KiCad project lives in the darshp848/open-actuator-drive repository on GitHub; these links point at the commit this page was built from.

DF40 Header Breakout: common questions

How big is the DF40 Header Breakout?

The DF40 Header Breakout measures 99.5 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DF40 Header Breakout?

3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DF40 Header Breakout design files?

From the darshp848/open-actuator-drive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DF40 Header Breakout design in my own project?

Yes, under the terms of its Apache-2.0 license, which darshp848 chose for the repository.

More boards in open-actuator-drive

Similar boards