Hpm6e80-carrier

DataFlux-Robot·fluxpcb·projects/hpm6e80-core/pcb/carrier/hpm6e80-carrier.kicad_pcb

Hpm6e80-carrier PCB layout, top view — open source board by DataFlux-Robot

About the Hpm6e80-carrier PCB

Hpm6e80-carrier is an open source PCB design by DataFlux-Robot, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 55 mm, with 11 components from 8 distinct parts.

By type, the board carries 5 resistors, 4 connectors, 1 antenna and 1 capacitor.

From the project

全自动AI电路设计流水线: 需求→选型→原理图→PCB→验收仿真→固件,六环节门禁闭环 | Six-stage automated circuit design pipeline with machine-checkable verification gates

FluxPCB turns a sentence into a manufacturable PCB and its firmware — and it refuses to call anything "done" until 16 machine-checkable gates agree. No gate, no glory.

LLMs write beautiful netlists — and occasionally invent pin numbers. FluxPCB's rule: the LLM generates; deterministic solvers and real EDA tools decide. A failed gate emits structured feedback, the pipeline regenerates, retries are bounded. "Complete" is a physical verdict, not a vibe.

Hpm6e80-carrier, from the project README
From the project README

Hpm6e80-carrier bill of materials (BOM)

11 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RJ45-ECAT-P0
J1
1
RJ45-ECAT-P1
J2
1
RJ45-TSN-GBE
J3
1
USB-C-5V
J4
1
U.FL-ANT
ANT1
1
1nF/2kV
C1
2
5.1k
R1, R2
3
75R
R3, R4, R5

Hpm6e80-carrier design files

The KiCad project lives in the DataFlux-Robot/fluxpcb repository on GitHub; these links point at the commit this page was built from.

Hpm6e80-carrier: common questions

How big is the Hpm6e80-carrier PCB?

The Hpm6e80-carrier measures 90 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hpm6e80-carrier?

11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hpm6e80-carrier design files?

From the DataFlux-Robot/fluxpcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Hpm6e80-carrier design in my own project?

Yes, under the terms of its Apache-2.0 license, which DataFlux-Robot chose for the repository.

More boards in fluxpcb