Esp32s31-mini

DataFlux-Robot·fluxpcb·projects/esp32s31-mini/pcb/board/esp32s31-mini.kicad_pcb

Esp32s31-mini PCB layout, top view — open source ESP32 board by DataFlux-Robot

About the Esp32s31-mini PCB

Esp32s31-mini is an open source ESP32 PCB design by DataFlux-Robot, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 52 × 30 mm, with 15 components from 13 distinct parts.

Its main chip is the ESP32-S31-WROOM-3U, from the ESP32 family. Other key parts include the AP2112K-3.3. By type, the board carries 4 connectors, 4 resistors, 3 capacitors, 1 IC, 1 module and 1 switch.

From the project

全自动AI电路设计流水线: 需求→选型→原理图→PCB→验收仿真→固件,六环节门禁闭环 | Six-stage automated circuit design pipeline with machine-checkable verification gates

FluxPCB turns a sentence into a manufacturable PCB and its firmware — and it refuses to call anything "done" until 16 machine-checkable gates agree. No gate, no glory.

LLMs write beautiful netlists — and occasionally invent pin numbers. FluxPCB's rule: the LLM generates; deterministic solvers and real EDA tools decide. A failed gate emits structured feedback, the pipeline regenerates, retries are bounded. "Complete" is a physical verdict, not a vibe.

Esp32s31-mini, from the project README
From the project README

Main components on the Esp32s31-mini

AP2112K-3.3ESP32-S31-WROOM-3U

Esp32s31-mini bill of materials (BOM)

15 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U1
1
ESP32-S31-WROOM-3U
MOD1
1
HDR-1
J1
1
HDR-2
J2
1
HDR-PROG
J3
1
USB-C
J4
1
RESET
SW1
1
RED
D1
2
10uF
C1, C2
1
100nF
C3
1
1k
R1
1
10k
R2
2
5.1k
R5, R6

Esp32s31-mini design files

The KiCad project lives in the DataFlux-Robot/fluxpcb repository on GitHub; these links point at the commit this page was built from.

Esp32s31-mini: common questions

What microcontroller does the Esp32s31-mini use?

The Esp32s31-mini is built around the ESP32-S31-WROOM-3U, from the ESP32 family.

How big is the Esp32s31-mini PCB?

The Esp32s31-mini measures 52 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32s31-mini?

15 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32s31-mini design files?

From the DataFlux-Robot/fluxpcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Esp32s31-mini design in my own project?

Yes, under the terms of its Apache-2.0 license, which DataFlux-Robot chose for the repository.

Can I test firmware for the Esp32s31-mini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in fluxpcb

Similar boards