Stm32n6-px4

DataFlux-Robot·fluxpcb·projects/stm32n6-px4/pcb/board/stm32n6-px4.kicad_pcb

Stm32n6-px4 PCB layout, top view — open source STM32 board by DataFlux-Robot

About the Stm32n6-px4 PCB

Stm32n6-px4 is an open source STM32 PCB design by DataFlux-Robot, published on GitHub under the Apache-2.0 license. It is a 6-layer board measuring 55 × 28 mm, with 21 components from 19 distinct parts.

Its main chip is the STM32N657X0H3Q, from the STM32 family. Other key parts include the ICM-42688-P, BMP388, IST8310, AP2112K-3.3 and SN65HVD230. By type, the board carries 8 ICs, 7 connectors, 2 crystals, 2 inductors, 1 diode and 1 resistor.

From the project

全自动AI电路设计流水线: 需求→选型→原理图→PCB→验收仿真→固件,六环节门禁闭环 | Six-stage automated circuit design pipeline with machine-checkable verification gates

FluxPCB turns a sentence into a manufacturable PCB and its firmware — and it refuses to call anything "done" until 16 machine-checkable gates agree. No gate, no glory.

LLMs write beautiful netlists — and occasionally invent pin numbers. FluxPCB's rule: the LLM generates; deterministic solvers and real EDA tools decide. A failed gate emits structured feedback, the pipeline regenerates, retries are bounded. "Complete" is a physical verdict, not a vibe.

Stm32n6-px4, from the project README
From the project README

Main components on the Stm32n6-px4

Stm32n6-px4 bill of materials (BOM)

21 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32N657X0H3Q
U1
2
ICM-42688-P
U2, U3
2
BMP388
U4, U5
1
IST8310
U6
1
AP2112K-3.3
U7
1
SN65HVD230
U8
1
24MHz
Y1
1
32.768k
Y2
1
GPS
J1
1
TELEM
J2
1
RC
J3
1
USB-C
J4
1
SWD
J5
1
PWM
J6
1
DEBUG
J7
1
BLUE
D1
1
600R@100M
FB1
1
2.2uH
L1
1
1k
R1

Stm32n6-px4 design files

The KiCad project lives in the DataFlux-Robot/fluxpcb repository on GitHub; these links point at the commit this page was built from.

Stm32n6-px4: common questions

What microcontroller does the Stm32n6-px4 use?

The Stm32n6-px4 is built around the STM32N657X0H3Q, from the STM32 family.

How big is the Stm32n6-px4 PCB?

The Stm32n6-px4 measures 55 × 28 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Stm32n6-px4?

21 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32n6-px4 design files?

From the DataFlux-Robot/fluxpcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Stm32n6-px4 design in my own project?

Yes, under the terms of its Apache-2.0 license, which DataFlux-Robot chose for the repository.

Can I test firmware for the Stm32n6-px4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in fluxpcb

Similar boards