SoloCarbonite
About the SoloCarbonite PCB
SoloCarbonite is an open source AVR/Arduino PCB design by davedarko, published on GitHub. It is a 2-layer board measuring 27 × 67 mm, with 17 components from 8 distinct parts.
Its main chip is the C1337190, from the AVR/Arduino family. By type, the board carries 5 diodes, 5 capacitors, 2 resistors, 1 IC, 1 connector and 1 battery holder.
From the project
Find all of my simple add-ons in this repository
Find all of my ~~shitty~~ simple add-ons in this repository. Plus some badges that were never converted to SAO but they still blink and everything.
Main components on the SoloCarbonite
SoloCarbonite bill of materials (BOM)
17 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C1337190 ATtiny412-SS | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | DNP Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Battery | Battery_holder_CR2023_BS-08-B2 | BT1 |
| 1 | DNP Jumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 5 | C5378735 SK6805-EC3210R | LED_SK6805-EC3210R | D1, D2, D3, D4, D5 |
| 5 | C14663 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5 |
| 2 | C25804 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
SoloCarbonite design files
The KiCad project lives in the davedarko/Simple-Add-ons-SAO repository on GitHub; these links point at the commit this page was built from.
SoloCarbonite: common questions
What microcontroller does the SoloCarbonite use?
The SoloCarbonite is built around the C1337190, from the AVR/Arduino family.
How big is the SoloCarbonite PCB?
The SoloCarbonite measures 27 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SoloCarbonite?
17 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the SoloCarbonite design files?
From the davedarko/Simple-Add-ons-SAO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SoloCarbonite design in my own project?
The repository has no license, so all rights stay with davedarko. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SoloCarbonite without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Simple-Add-ons-SAO
SAO library
500 × 15 mm45 parts2LNo license11
AVR/ArduinoKitt 0805
50 × 30 mm21 parts2LNo license11
SAO library stick short
302 × 15 mm20 parts2LNo license11
AVR/ArduinoSaomr
40 × 39.8 mm13 parts2LNo license11
RISC-VMysterio
38.8 × 34.1 mm9 parts4LNo license11
Drawing
16 × 50 mm9 parts2LNo license11
RP2040/RP2350SAO stick sideways
153.4 × 25 mm8 parts2LNo license11
VendettaSAO
34.4 × 45.7 mm7 parts2LNo license11
Henlo blinkyparts style
40 × 34 mm5 parts2LNo license11
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746