Mysterio
About the Mysterio PCB
Mysterio is an open source RISC-V PCB design by davedarko, published on GitHub. It is a 4-layer board measuring 38.8 × 34.1 mm, with 9 components from 5 distinct parts.
Its main chip is the CH32V003JxMx, from the RISC-V family. By type, the board carries 4 diodes, 2 resistors, 1 IC, 1 connector and 1 capacitor.
From the project
Find all of my simple add-ons in this repository
Find all of my ~~shitty~~ simple add-ons in this repository. Plus some badges that were never converted to SAO but they still blink and everything.
Main components on the Mysterio
Mysterio bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003JxMx | SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_02x03_Odd_Even | IDC-Header_2x03_P2.54mm_Vertical | J1 |
| 4 | SK6805-EC3210R | LED_SK6805-EC3210R | D1, D2, D3, D4 |
| 1 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
Mysterio design files
The KiCad project lives in the davedarko/Simple-Add-ons-SAO repository on GitHub; these links point at the commit this page was built from.
Mysterio: common questions
What microcontroller does the Mysterio use?
The Mysterio is built around the CH32V003JxMx, from the RISC-V family.
How big is the Mysterio PCB?
The Mysterio measures 38.8 × 34.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Mysterio?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mysterio design files?
From the davedarko/Simple-Add-ons-SAO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mysterio design in my own project?
The repository has no license, so all rights stay with davedarko. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mysterio without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in Simple-Add-ons-SAO
SAO library
500 × 15 mm45 parts2LNo license11
AVR/ArduinoKitt 0805
50 × 30 mm21 parts2LNo license11
SAO library stick short
302 × 15 mm20 parts2LNo license11
AVR/ArduinoSoloCarbonite
27 × 67 mm17 parts2LNo license11
AVR/ArduinoSaomr
40 × 39.8 mm13 parts2LNo license11
Drawing
16 × 50 mm9 parts2LNo license11
RP2040/RP2350SAO stick sideways
153.4 × 25 mm8 parts2LNo license11
VendettaSAO
34.4 × 45.7 mm7 parts2LNo license11
Henlo blinkyparts style
40 × 34 mm5 parts2LNo license11
Similar boards
RISC-VWorkbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0129
RISC-VKeytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105
RISC-VCh32v003f4u6 with wsled
40.6 × 44.5 mm26 parts2LMIT105
RISC-VFroggyswadge
81.5 × 72.2 mm92 parts2LMIT105
RISC-VNorthPoleCircuit
Janky-Jingle-Crew
150 × 110 mm46 parts4LNo license62
RISC-VOsc sg90-v006
OpenServoCore
20.6 × 9.6 mm26 parts4LApache-2.034