USB-to-Serial
DavidMFlynn·USB-to-Serial·mcp2200_Packet8/USBtoTTL_Serial.kicad_pcb
About the USB-to-Serial PCB
USB-to-Serial is an open source PCB design by DavidMFlynn, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120.7 × 19.1 mm, with 36 components from 13 distinct parts.
Other key parts include the MCP1700-1202E_SOT23 and MCP2200-I-SO. By type, the board carries 10 connectors, 10 diodes, 7 capacitors, 6 resistors, 2 ICs and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
From the project
USB to TTL Packet Serial
Main components on the USB-to-Serial
USB-to-Serial bill of materials (BOM)
36 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700-1202E_SOT23 | SOT-23 | U1 |
| 1 | MCP2200-I-SO | SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | 12MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J1 |
| 1 | Conn_01x02 | Molex_SL_171971-0002_1x02_P2.54mm_Vertical | J3 |
| 8 | Conn_01x04 | Molex_SL_171971-0004_1x04_P2.54mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 8 | 1N4148W | D_SOD-123 | D3, D4, D5, D6, D7, D8, D9, D10 |
| 2 | 15pf | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3 |
| 1 | 4.7uf | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 4 | 0.1uf | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C6, C7 |
| 4 | 4K7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4 |
| 2 | 0 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6 |
USB-to-Serial design files
The KiCad project lives in the DavidMFlynn/USB-to-Serial repository on GitHub; these links point at the commit this page was built from.
USB-to-Serial: common questions
How big is the USB-to-Serial PCB?
The USB-to-Serial measures 120.7 × 19.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-to-Serial?
36 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-to-Serial design files?
From the DavidMFlynn/USB-to-Serial repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the USB-to-Serial design in my own project?
Yes, under the terms of its GPL-3.0 license, which DavidMFlynn chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389