11 open source boards using the MCP2200-I-SO

Real designs built with the MCP2200-I-SO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the MCP2200-I-SO

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP2200-I-SO connects to, and the resistors, capacitors and other passives placed on it.

  • The GP5 pin is left unconnected on 7 of 7 designs.
  • The GP4 pin is left unconnected on 7 of 7 designs.
  • The GP3 pin is left unconnected on 7 of 7 designs.
  • The GP2 pin is left unconnected on 7 of 7 designs.
VDDpin 1Connected to: VDD 71% · a signal 29%
  • Decoupling capacitor on 71% · 100 nF (3), 22 pF (1), 220 nF (1)
OSC1pin 2Connected to: Signal 86%
  • Capacitor to GND on 71% · 22 pF (2), 15 pF (1), 20 pF (1)
  • Crystal on 57% · 12 MHz (3)
OSC2pin 3Connected to: Signal 71% · not connected 29%
  • Capacitor to GND on 43% · 15 pF (1), 22 pF (1), 27 pF (1)
RSTpin 4Connected to: Signal 86%
  • Pull-up to VDD on 71% · 4.7 kΩ (3), 3.3 kΩ (1), 10 kΩ (1)
GP7/TXLEDpin 5Connected to: Signal 71% · not connected 29%
  • Series resistor on 43% · 220 Ω (1), 150 Ω (1), 120 Ω (1)
GP6/RXLEDpin 6Connected to: Signal 71% · not connected 29%
  • Series resistor on 43% · 220 Ω (1), 150 Ω (1), 120 Ω (1)
GP5pin 7Connected to: Not connected 100%
GP4pin 8Connected to: Not connected 100%
GP3pin 9Connected to: Not connected 100%
RTSpin 11Connected to: Not connected 86%
CTSpin 13Connected to: Not connected 71%
GP2pin 14Connected to: Not connected 100%
GP1/USB-CFGpin 15Connected to: Not connected 100%
GP0/SSPNDpin 16Connected to: Not connected 100%
V_USBpin 17Connected to: 3.3V 43% · a signal 43%
  • Decoupling capacitor on 57% · 100 nF (3), 22 pF (1), 10 µF (1)
VSSpin 20Connected to: GND 100%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include USB-to-Serial by DavidMFlynn, WolfNet 6502 WBC - Motherboard by WolfNet-Computing, Project tarkus by blfp1 and Co design of electronic products by gabrieldelmonte.

The MCP2200-I-SO in open source designs

The gallery holds 11 open source boards using the MCP2200-I-SO from 7 GitHub repositories; a typical one measures about 95.3 × 62 mm and carries around 65 components.

64% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is WolfNet 6502 WBC - Motherboard by WolfNet-Computing.

Parts used alongside the MCP2200-I-SO

Microcontrollers on boards using the MCP2200-I-SO

MCP2200-I-SO: common questions

Where can I find a MCP2200-I-SO reference design?

Each of the 11 boards on this page is a real design using the MCP2200-I-SO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP2200-I-SO GP5 pin connected?

The GP5 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MCP2200-I-SO.

How is the MCP2200-I-SO GP4 pin connected?

The GP4 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MCP2200-I-SO.

How is the MCP2200-I-SO GP3 pin connected?

The GP3 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MCP2200-I-SO.

What parts are used alongside the MCP2200-I-SO?

The 24LC512, LD1117S33TR and LD1117S33TR_SOT223 appear in the most repositories here.

Which microcontrollers do boards using the MCP2200-I-SO use?

Most are built on PIC (3), STM32 (3) and Microchip SAM (2).

How big is a typical board using the MCP2200-I-SO?

The median is 95.3 × 62 mm, and 64% are two-layer designs.

What is the most popular open source board using the MCP2200-I-SO?

By GitHub stars, WolfNet 6502 WBC - Motherboard by WolfNet-Computing, with 1 stars.

Can I simulate one of these boards using the MCP2200-I-SO before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part