Medidor energia esp32
davixcky·medidor-energia-esp32·hardware/medidor-energia.kicad_pcb
About the Medidor energia esp32 PCB
Medidor energia esp32 is an open source ESP32 PCB design by davixcky, published on GitHub. It is a 2-layer board measuring 150 × 90 mm, with 38 components from 27 distinct parts.
Its main chip is the ESP32-DevKitC V4 (38 pines), from the ESP32 family. By type, the board carries 11 resistors, 9 capacitors, 8 diodes, 6 connectors, 2 switches and 1 IC.
It belongs with the iot & wireless designs in this gallery.
From the project
Medidor de energía no invasivo de dos canales con ESP32: hardware, firmware, plataforma web y pronóstico LSTM (CUC, Sistemas Embebidos 1)
Avance 2 del proyecto de aula (ABPr) — Corte 2
Sistemas Embebidos 1 · Ingeniería Electrónica · Universidad de la Costa (CUC) · Periodo 2026-2
Integrantes: David Orozco · Jose Torres · Leo Rojas
1. Introducción 2. Objetivos 3. Planteamiento del problema 4. Marco teórico 5. Estado del arte 6. Listado de materiales 7. Componente técnico 8. Verificación de la metodología y del cronograma 9. Referencias 10. Anexo: archivos fuente y cómo regenerar las ilustraciones

Main components on the Medidor energia esp32
Medidor energia esp32 bill of materials (BOM)
38 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DevKitC V4 (38 pines) | ESP32-DevKitC-38_Zocalo | U1 |
| 1 | Bornera 5 V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Jack 3,5 mm de panel (pinza SCT-013-000 CH1) | Cable_Jack_Panel | J2 |
| 1 | Jack 3,5 mm de panel (pinza SCT-013-000 CH2) | Cable_Jack_Panel | J3 |
| 1 | Bornera ZMPT | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J5 |
| 1 | OLED (GND VCC SCL SDA) | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | Reserva ADC1 | PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | PTC 1,1 A (MF-R110) | Fuse_BelFuse_0ZRE0040FF_L11.5mm_W3.8mm | F2 |
| 2 | Pulsador de panel 12 mm NA | PinHeader_1x02_P2.54mm_Vertical | SW1, SW2 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 3 | BAT85 | D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D2, D3, D5 |
| 3 | BAT85 | D_DO-35_SOD27_P7.62mm_Horizontal | D4, D6, D7 |
| 1 | LED verde 5 mm (panel) | PinHeader_1x02_P2.54mm_Vertical | D8 |
| 1 | 470u 10V | CP_Radial_D8.0mm_P5.00mm | C1 |
| 2 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C8 |
| 2 | 47n C0G | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5, C6 |
| 1 | 10u 16V | CP_Radial_D5.0mm_P2.50mm | C7 |
| 1 | 27n C0G | C_Disc_D7.5mm_W5.0mm_P7.50mm | C9 |
| 2 | 100n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C10, C11 |
| 1 | 15k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R4 |
| 2 | 3,3k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 1 | 11k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 13k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 2 | 4,7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R13 |
Medidor energia esp32 design files
The KiCad project lives in the davixcky/medidor-energia-esp32 repository on GitHub; these links point at the commit this page was built from.
Medidor energia esp32: common questions
What microcontroller does the Medidor energia esp32 use?
The Medidor energia esp32 is built around the ESP32-DevKitC V4 (38 pines), from the ESP32 family.
How big is the Medidor energia esp32 PCB?
The Medidor energia esp32 measures 150 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Medidor energia esp32?
38 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Medidor energia esp32 design files?
From the davixcky/medidor-energia-esp32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Medidor energia esp32 design in my own project?
The repository has no license, so all rights stay with davixcky. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Medidor energia esp32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k