HardLabs

Adafruit TPS61023

dcuccia·digital-handbell·hardware/reference/adafruit-4654/kicad/Adafruit TPS61023.kicad_pcb

Adafruit TPS61023 PCB layout, top view — open source RP2040/RP2350 board by dcuccia

About the Adafruit TPS61023 PCB

Adafruit TPS61023 is an open source RP2040/RP2350 PCB design by dcuccia, published on GitHub under the MIT license. It is a 2-layer board measuring 11.4 × 17.8 mm, with 11 components from 9 distinct parts.

Its main chip is the RP2040_QFN56, from the RP2040/RP2350 family. By type, the board carries 3 ICs, 3 capacitors, 3 resistors, 1 jumper and 1 inductor.

It belongs with the audio and power & battery designs in this gallery.

From the project

A software and hardware project to create a digital handbell using microcontrollers and speakers and gesture recognition

Immutable imported reference, not a qualified handbell power supply. Source: Adafruit TPS61023 PCB, product 4654, commit 82b5a33a1900a5c13849029bc84e7856a44086e0.

Designed by Limor Fried/Ladyada for Adafruit Industries. The complete original README and required notice and CC BY-SA 3.0 Unported license accompany byte-exact EAGLE sources. Native conversions retain those terms, not the root MIT license. This reference/adaptation is not an Adafruit endorsement.

Main components on the Adafruit TPS61023

RP2040_QFN56

Adafruit TPS61023 bill of materials (BOM)

11 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040_QFN56
TPS61023
IC1
1
—
U$10
1
—
U$11
1
—
JP1
1
1uH
L1
1
10UF/16V
22uF
C1
2
22PF
22uF
C2, C3
2
10K
100K
R1, R3
1
10K
732K
R2

Adafruit TPS61023 design files

The KiCad project lives in the dcuccia/digital-handbell repository on GitHub; these links point at the commit this page was built from.

Adafruit TPS61023: common questions

What microcontroller does the Adafruit TPS61023 use?

The Adafruit TPS61023 is built around the RP2040_QFN56, from the RP2040/RP2350 family.

How big is the Adafruit TPS61023 PCB?

The Adafruit TPS61023 measures 11.4 × 17.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Adafruit TPS61023?

11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Adafruit TPS61023 design files?

From the dcuccia/digital-handbell repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Adafruit TPS61023 design in my own project?

Yes, under the terms of its MIT license, which dcuccia chose for the repository.

Can I test firmware for the Adafruit TPS61023 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in digital-handbell

Similar boards