HardLabs

Keeboard

Deeeeelan·keeboard·hardware/keeboard.kicad_pcb

Keeboard PCB layout, top view — open source RP2040/RP2350 board by Deeeeelan

About the Keeboard PCB

Keeboard is an open source RP2040/RP2350 PCB design by Deeeeelan, published on GitHub under the MIT license. It is a 2-layer board measuring 344.8 × 105.4 mm, with 144 components from 5 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 73 switches, 70 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

A project creating for Hack Club's Keeb YSWS!

Main components on the Keeboard

RaspberryPi_Pico

Keeboard bill of materials (BOM)

144 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
2
MX_stab
S1, S2
1
MX_stab
S3
70
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +62
70
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +62

Keeboard design files

The KiCad project lives in the Deeeeelan/keeboard repository on GitHub; these links point at the commit this page was built from.

Keeboard: common questions

What microcontroller does the Keeboard use?

The Keeboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keeboard PCB?

The Keeboard measures 344.8 × 105.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keeboard?

144 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Keeboard design files?

From the Deeeeelan/keeboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Keeboard design in my own project?

Yes, under the terms of its MIT license, which Deeeeelan chose for the repository.

Can I test firmware for the Keeboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards