Stensgrind
Deltaphish·stensgrind·stensgrind_pcb/stensgrind_pcb.kicad_pcb
About the Stensgrind PCB
Stensgrind is an open source PCB design by Deltaphish, published on GitHub under the MIT license. It is a 4-layer board measuring 155.5 × 97.1 mm, with 176 components from 16 distinct parts.
Other key parts include the ProMicro_r, CAHCT1G125QDCKRQ1, 4492 and ISO1050DUB. By type, the board carries 52 ICs, 47 diodes, 46 switches, 11 resistors, 6 connectors and 6 test points.
It belongs with the keyboards designs in this gallery.
From the project
Split keyboard based on Corne layout
Main components on the Stensgrind
Stensgrind bill of materials (BOM)
176 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ProMicro_r | ProMicro | U1, U27 |
| 2 | CAHCT1G125QDCKRQ1 | DCK5 | U2, U29 |
| 46 | 4492 | LED_4492 | U3, U4, U5, U6, U7, U8, U9, U10 +38 |
| 2 | ISO1050DUB | SOP-8_6.62x9.15mm_P2.54mm | U26, U28 |
| 3 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J1, J4, J6 |
| 2 | SERIAL_01 | PinSocket_1x03_P2.54mm_Vertical | J2, J5 |
| 1 | DISPLAY_01 | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 4 | 500 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R_LED_DATA_1, R_LED_DATA_2, R_LED_DATA_3, R_LED_DATA_4 |
| 46 | SW_PUSH | keyswitch_cherrymx_hotswap_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38 |
| 6 | 0.5mm | TestPoint-0.5mm | TP1, TP2, TP3, TP13, TP14, TP17 |
| 46 | D | D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +38 |
| 1 | LED | LED_1206_3216Metric | D47 |
| 4 | 0.1uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 8 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R4, R5, R6, R8, R9, R10 |
| 2 | 120 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7 |
| 1 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
Stensgrind design files
The KiCad project lives in the Deltaphish/stensgrind repository on GitHub; these links point at the commit this page was built from.
Stensgrind: common questions
How big is the Stensgrind PCB?
The Stensgrind measures 155.5 × 97.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Stensgrind?
176 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stensgrind design files?
From the Deltaphish/stensgrind repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stensgrind design in my own project?
Yes, under the terms of its MIT license, which Deltaphish chose for the repository.
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3kLily58 Pro BOTTOM
kata0510
142.5 × 106.3 mm5 parts2LMIT2.3kLily58
kata0510
142.5 × 106.3 mm83 parts2LMIT2.3kLily58 Pro
kata0510
142.5 × 106.3 mm83 parts2LMIT2.3kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kPcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k