6 open source boards using the 4492

Real designs built with the 4492, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 4492

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 4492 connects to, and the resistors, capacitors and other passives placed on it.

  • The DIN pin has a series resistor on 3 of 5 designs, most often 470 Ω (then 10 kΩ).
  • The VDD pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 2.2 µF).
DINpin 1Connected to: Signal 100%
  • Series resistor on 60% · 470 Ω (1), 10 kΩ (1), 500 Ω (1)
VDDpin 2Connected to: Signal 60% · VCC 40%
  • Capacitor to GND on 60% · 100 nF (2), 2.2 µF (1)
GNDpin 4Connected to: GND 80% · a signal 20%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pcb business card by AG2048, ESP32Sensor by LESA-RPI, Hospital bed control unit by Amaza-Ronald and Stensgrind by Deltaphish.

The 4492 in open source designs

The gallery holds 6 open source boards using the 4492 from 5 GitHub repositories; a typical one measures about 86.1 × 62.4 mm and carries around 93 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Pcb business card by AG2048.

Parts used alongside the 4492

Microcontrollers on boards using the 4492

4492: common questions

Where can I find a 4492 reference design?

Each of the 6 boards on this page is a real design using the 4492. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 4492 DIN pin?

The DIN pin has a series resistor on 3 of 5 designs, most often 470 Ω (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the 4492.

How is the 4492 VDD pin connected?

The VDD pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the 4492.

Which microcontrollers do boards using the 4492 use?

Most are built on ESP32 (3), AVR/Arduino (1) and Raspberry Pi (1).

How big is a typical board using the 4492?

The median is 86.1 × 62.4 mm, and 33% are two-layer designs.

What is the most popular open source board using the 4492?

By GitHub stars, Pcb business card by AG2048, with 3 stars.

Can I simulate one of these boards using the 4492 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part