HardLabs

Arduino ISP Shield

DennisSchulmeister·dhbwka-wwi-iot-2023-quellcodes·Hardware/Arduino ISP Shield/KiCAD/Arduino ISP Shield.kicad_pcb

Arduino ISP Shield layout, top view — open source AVR/Arduino board by DennisSchulmeister

About the Arduino ISP Shield

Arduino ISP Shield is an open source AVR/Arduino PCB design by DennisSchulmeister, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 16 components from 10 distinct parts.

Its main chip is the ATmega328-P, from the AVR/Arduino family. By type, the board carries 4 connectors, 4 resistors, 3 diodes, 3 capacitors, 1 IC and 1 crystal.

It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.

From the project

Quellcodes zum Wahlmodul „Internet of Things – Hardwarenahe Programmierung” im Studiengang Wirtschaftsinformatik an der DHBW Karlsruhe (ab Herbst 2023)

Quellcodes zum Wahlmodul „IoT - Hardwarenahe Programmierung” ============================================================

Dieses Repository beinhaltet sämtliche zur Verfügung gestellten Quellcodes, Aufgaben und Praxisbeispiele des Wahlmoduls „IoT – Hardwarenahe Programmierung” im Studiengang Wirtschaftsinformatik an der DHBW Karlsruhe.

Sämtliche Quellcodes sind lizenziert unter Creative Commons Namensnennung 4.0 International

Main components on the Arduino ISP Shield

ATmega328-P

Arduino ISP Shield bill of materials (BOM)

16 components, 10 distinct parts.

QtyPartRefs
1
ATmega328-P
U1
1
16 MHz
Y1
2
Conn_01x08_Male
J1, J4
1
Conn_01x06_Male
J2
1
Conn_01x10_Male
J3
3
LED
D1, D2, D3
2
15pF
C1, C2
1
100nF
C3
3
R
R1, R2, R3
1
1M
R4

Arduino ISP Shield design files

The KiCad project lives in the DennisSchulmeister/dhbwka-wwi-iot-2023-quellcodes repository on GitHub; these links point at the commit this page was built from.

Arduino ISP Shield: common questions

What microcontroller does the Arduino ISP Shield use?

The Arduino ISP Shield is built around the ATmega328-P, from the AVR/Arduino family.

How big is the Arduino ISP Shield?

The Arduino ISP Shield measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino ISP Shield?

16 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino ISP Shield design files?

From the DennisSchulmeister/dhbwka-wwi-iot-2023-quellcodes repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arduino ISP Shield design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which DennisSchulmeister chose for the repository.

Can I test firmware for the Arduino ISP Shield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in dhbwka-wwi-iot-2023-quellcodes

Similar boards