BuckConverter
devanshjoshi08·BuckConverter·BuckConverterLab/Lab7_302.kicad_pcb
About the BuckConverter PCB
BuckConverter is an open source PCB design by devanshjoshi08, published on GitHub. It is a 2-layer board measuring 138 × 102.5 mm, with 37 components from 13 distinct parts.
Other key parts include the TPS2832D and TLV2372. By type, the board carries 7 capacitors, 5 resistors, 2 ICs, 2 transistors and 1 inductor.
It belongs with the power & battery and test & measurement designs in this gallery.
From the project
High-efficiency power conversion circuit that steps down a higher input voltage to a lower output voltage for a load. Unlike simple methods such as resistor dividers, which dissipate energy as heat, it uses switching elements (typically MOSFETs) and inductive filtering to regulate voltage efficiently with >90% efficiency
A buck converter is a high-efficiency power conversion circuit that steps a higher input voltage down to a lower output voltage for a load. Instead of burning off the difference as heat the way a resistor divider would, it uses switching MOSFETs and an LC filter to regulate the output efficiently, typically above 90 percent.
This project covers the full hardware design cycle: schematic capture, PCB layout, Gerber generation for fabrication, hand assembly of the manufactured board, and bench testing.

Main components on the BuckConverter
BuckConverter bill of materials (BOM)
37 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS2832D | SO-8_3.9x4.9mm_P1.27mm | IC2 |
| 1 | TLV2372 | SO-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | CSD18534KCS | TO-220-3_Vertical | Q1, Q2 |
| 3 | Screw_Terminal_01x02 | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | 10VD1, Vin1, Vout1 |
| 16 | TestPoint | TestPoint_Keystone_5010-5014_Multipurpose | 10V_T2, GND_T1, GND_T2, GND_T3, GND_T4, GND_T5, GND_T6, GND_T7 +8 |
| 1 | Conn_Coaxial | BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | PWM1 |
| 1 | 7447231101 | 7447231101 | L1 |
| 3 | 10u | C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C6, C7 |
| 4 | 1u | C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3, C4, C5 |
| 1 | 0.5 | R_Axial_DIN0922_L20.0mm_D9.0mm_P30.48mm_Horizontal | R1 |
| 1 | 5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
BuckConverter design files
The KiCad project lives in the devanshjoshi08/BuckConverter repository on GitHub; these links point at the commit this page was built from.
BuckConverter: common questions
How big is the BuckConverter PCB?
The BuckConverter measures 138 × 102.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BuckConverter?
37 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the BuckConverter design files?
From the devanshjoshi08/BuckConverter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BuckConverter design in my own project?
The repository has no license, so all rights stay with devanshjoshi08. Use it as a reference, and ask the author before reusing the design.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k