Banana-MINI

devesh1995·Banana-MINI·Kicad/Ch32V003F4U6.kicad_pcb

Banana-MINI PCB layout, top view — open source RISC-V board by devesh1995

About the Banana-MINI PCB

Banana-MINI is an open source RISC-V PCB design by devesh1995, published on GitHub under the Unlicense license. It is a 2-layer board measuring 17.3 × 27.9 mm, with 23 components from 15 distinct parts.

Its main chip is the CH32V003F4U6, from the RISC-V family. Other key parts include the AMS1117-3.3. By type, the board carries 6 resistors, 5 capacitors, 4 connectors, 2 ICs, 2 jumpers and 2 diodes.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

CH32V003F4U6 Dev Board

Main components on the Banana-MINI

Banana-MINI bill of materials (BOM)

23 components, 15 distinct parts.

QtyPartRefs
1
CH32V003F4U6
U1
1
AMS1117-3.3
U2
1
24MHz
Y2
1
USB_B_Micro
J1
2
Conn_01x10_Pin
J2, J6
1
Conn_01x02_Pin
J7
2
SolderJumper_2_Open
JP1, JP2
1
SW_Push
SW2
2
LED_0603
D1, D2
1
1uF_0402
C1
1
10uF_0603
C4
1
0.1uF_0201
C9
2
12pF_0201
C10, C11
2
0R_0402
R1, R2
4
1K_0402
R3, R4, R5, R6

Banana-MINI design files

The KiCad project lives in the devesh1995/Banana-MINI repository on GitHub; these links point at the commit this page was built from.

Banana-MINI: common questions

What microcontroller does the Banana-MINI use?

The Banana-MINI is built around the CH32V003F4U6, from the RISC-V family.

How big is the Banana-MINI PCB?

The Banana-MINI measures 17.3 × 27.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Banana-MINI?

23 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Banana-MINI design files?

From the devesh1995/Banana-MINI repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Banana-MINI design in my own project?

Yes, under the terms of its Unlicense license, which devesh1995 chose for the repository.

Can I test firmware for the Banana-MINI without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

Similar boards