WSLED Mini
About the WSLED Mini PCB
WSLED Mini is an open source ESP8266 PCB design by devesh1995, published on GitHub under the Unlicense license. It is a 2-layer board measuring 27.4 × 49.5 mm, with 15 components from 13 distinct parts.
Its main chip is the Esp8266 Esp-12F Esp12F, from the ESP8266 family. Other key parts include the AMS1117CD-3.3. By type, the board carries 4 capacitors, 3 connectors, 3 resistors, 1 IC, 1 relay and 1 diode.
From the project
ESP8266 based WLED Controller with Power Management.
Make sure to recheck all the footprints.
Main components on the WSLED Mini
WSLED Mini bill of materials (BOM)
15 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117CD-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | WS_LED_IN_5V | TE_282837-2_ Screw_terminal_5mm_2Pole | J14 |
| 1 | WS_LED_OUT_5V | TE_282837-2_ Screw_terminal_5mm_2Pole | J15 |
| 1 | WS_LED_OUT_DATA | PinHeader_1x02_P2.54mm_Vertical | J20 |
| 1 | ~ | Esp8266 Esp-12F Esp12F | Esp1 |
| 1 | SANYOU_SRD_Form_C | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | ~ | Sot_23-3 2 Pin Drain | N_MOS_SOT-1 |
| 1 | LED_0603 | LED_0603_1608Metric | D7 |
| 2 | 6.3V_1000_8mm_4mm | CP_Radial_D8.0mm_P3.80mm | C17, C33 |
| 1 | 10uF_0603 | C_0603_1608Metric | C34 |
| 1 | 47uF_0805 | C_0805_2012Metric | C35 |
| 1 | 10R_0603 | R_0603_1608Metric | R15 |
| 2 | 10K_0402 | R_0402_1005Metric | R16, R17 |
WSLED Mini design files
The KiCad project lives in the devesh1995/WSLED_Mini repository on GitHub; these links point at the commit this page was built from.
WSLED Mini: common questions
What microcontroller does the WSLED Mini use?
The WSLED Mini is built around the Esp8266 Esp-12F Esp12F, from the ESP8266 family.
How big is the WSLED Mini PCB?
The WSLED Mini measures 27.4 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WSLED Mini?
15 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the WSLED Mini design files?
From the devesh1995/WSLED_Mini repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the WSLED Mini design in my own project?
Yes, under the terms of its Unlicense license, which devesh1995 chose for the repository.
Can I test firmware for the WSLED Mini without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398