Solderbit segment shift edition

devices-lab·solderbit-segment-shift-edition·kicad/solderbit-segment-shift-edition.kicad_pcb

Solderbit segment shift edition PCB layout, top view — open source board by devices-lab

About the Solderbit segment shift edition PCB

Solderbit segment shift edition is an open source PCB design by devices-lab, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 28 × 54 mm, with 15 components from 7 distinct parts.

Other key parts include the 74HC595D and SN74HC595N. By type, the board carries 10 resistors, 2 ICs, 1 connector and 1 capacitor.

It belongs with the displays & leds designs in this gallery.

From the project

Learn-to-solder kit using a 7-segment display

The solder:bit Segment Shift Edition is a variant of the original solder:bit Segment, designed for learning to solder both surface-mount (SMT) and through-hole (THT) components. Once assembled, it can display a single digit on a 7-segment display, driven by an 8-bit serial-in parallel-out (SIPO) shift register.

This soldering kit is designed to accommodate a wide range of soldering abilities. The shift register is available in two different packages. The 74HC595D in the SOP-16 package is smaller and more challenging to solder, while the SN74HC595N in the DIP-16 package is larger and…

Solderbit segment shift edition, from the project README
From the project README

Main components on the Solderbit segment shift edition

Solderbit segment shift edition bill of materials (BOM)

15 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74HC595D
U1
1
SN74HC595N
U2
1
Conn_01x08_Pin
J1
1
SM420561N
DS1
1
1UF
1uF
C1
2
100K
100k
R1, R2
8
300R
R3, R4, R5, R6, R7, R8, R9, R10

Solderbit segment shift edition design files

The KiCad project lives in the devices-lab/solderbit-segment-shift-edition repository on GitHub; these links point at the commit this page was built from.

Solderbit segment shift edition: common questions

How big is the Solderbit segment shift edition PCB?

The Solderbit segment shift edition measures 28 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Solderbit segment shift edition?

15 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Solderbit segment shift edition design files?

From the devices-lab/solderbit-segment-shift-edition repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Solderbit segment shift edition design in my own project?

Yes, under the terms of its GPL-3.0 license, which devices-lab chose for the repository.

Similar boards