8 open source boards using the SN74HC595N
Real designs built with the SN74HC595N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Amstrad cpc6128 romboard
bmpc
119.6 × 123.9 mm40 parts2LNo license6AVR/Arduino
Controller-Electrical-Schematics
mk4-dd
181.7 × 127.5 mm216 parts4LNo license0Board
EmilEmilchen
100 × 100 mm102 parts4LNo license0Rpihw
quorten
207 × 78.7 mm97 parts4LUnlicense0AVR/Arduino
8-led output
pbrowne011
120.3 × 83.8 mm19 parts2LNo license0Solderbit segment shift edition
devices-lab
28 × 54 mm15 parts2LGPL-3.00Zx50 FrontPanelDisplay
mmosko
152.4 × 114.3 mm37 parts2LNo license0DOUT
papaya
100 × 50 mm18 parts2LNo license0
How designs wire the SN74HC595N
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SN74HC595N connects to, and the resistors, capacitors and other passives placed on it.
- The QB pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 300 Ω).
- The QC pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 300 Ω).
- The QD pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 300 Ω).
- The QE pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 300 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| QBpin 1 | Connected to: Signal 100% |
|
| QCpin 2 | Connected to: Signal 88% |
|
| QDpin 3 | Connected to: A connector 25% |
|
| QEpin 4 | Connected to: A connector 25% |
|
| QFpin 5 | Connected to: A connector 25% |
|
| QGpin 6 | Connected to: A connector 25% |
|
| QHpin 7 | Connected to: A connector 25% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| SRCLRpin 10 | Connected to: VCC 63% · a signal 38% | — |
| QApin 15 | Connected to: Signal 75% · not connected 25% |
|
| VCCpin 16 | Connected to: VCC 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amstrad cpc6128 romboard by bmpc, Solderbit segment shift edition by devices-lab, Board by EmilEmilchen and Controller-Electrical-Schematics by mk4-dd.
The SN74HC595N in open source designs
The gallery holds 8 open source boards using the SN74HC595N from 8 GitHub repositories; a typical one measures about 119.9 × 91.9 mm and carries around 39 components.
63% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Amstrad cpc6128 romboard by bmpc.
Microcontrollers on boards using the SN74HC595N
What boards using the SN74HC595N are built for
SN74HC595N: common questions
Where can I find a SN74HC595N reference design?
Each of the 8 boards on this page is a real design using the SN74HC595N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SN74HC595N QB pin?
The QB pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 300 Ω). Counted from the KiCad layouts of 8 open source designs using the SN74HC595N.
What resistor goes on the SN74HC595N QC pin?
The QC pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 300 Ω). Counted from the KiCad layouts of 8 open source designs using the SN74HC595N.
What resistor goes on the SN74HC595N QD pin?
The QD pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 300 Ω). Counted from the KiCad layouts of 8 open source designs using the SN74HC595N.
Which microcontrollers do boards using the SN74HC595N use?
Most are built on AVR/Arduino (3).
How big is a typical board using the SN74HC595N?
The median is 119.9 × 91.9 mm, and 63% are two-layer designs.
What is the most popular open source board using the SN74HC595N?
By GitHub stars, Amstrad cpc6128 romboard by bmpc, with 6 stars.
Can I simulate one of these boards using the SN74HC595N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.