Dual-Channel Embedded Power Supply Board
devjamescollier·Dual-Channel_Embedded_Power_Supply_Board·Hardware/KiCad_Files/Dual-Channel_Embedded_Power_Control.kicad_pcb
About the Dual-Channel Embedded Power Supply Board
Dual-Channel Embedded Power Supply Board is an open source PCB design by devjamescollier, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 48 × 42 mm, with 55 components from 37 distinct parts.
Other key parts include the TPS54331DR. By type, the board carries 19 resistors, 18 capacitors, 6 diodes, 5 connectors, 3 transistors and 2 ICs.
It belongs with the power & battery and test & measurement designs in this gallery.
From the project
Battery-powered dual-output DC-DC power supply built around two Texas Instruments TPS54331 buck converters. Provides regulated +5 V and +3.3 V rails for embedded systems, with status LEDs, multiple output connectors, and accessible test points.
Battery-powered dual-output DC-DC power supply built around two Texas Instruments TPS54331 buck converters. Provides regulated +5 V and +3.3 V rails for embedded systems, with status LEDs, multiple output connectors, and accessible test points.
Designed as a compact two-layer PCB for portable and battery-powered electronics requiring efficient, low-noise power delivery.

Main components on the Dual-Channel Embedded Power Supply Board
Dual-Channel Embedded Power Supply Board bill of materials (BOM)
55 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPS54331DR | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 3 | AO3400A | SOT-23 | Q4, Q5, Q6 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1 |
| 1 | CONN_01X06 Conn_01x06 | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J2 |
| 2 | CONN_01X01 Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J5, J6 |
| 1 | CONN_01X02 Conn_01x02 | AMASS_XT60-M_1x02_P7.20mm_Vertical | J7 |
| 1 | 5V1 | D_SOD-123 | D2 |
| 2 | B340 | D_SMC | D3, D4 |
| 1 | WHITE | LED_0603_1608Metric | D6 |
| 1 | RED | LED_0603_1608Metric | D7 |
| 1 | YELLOW | LED_0603_1608Metric | D8 |
| 2 | 6.8UH 6.8uH | L_Bourns_SRP5030T | L1, L2 |
| 4 | 4.7UF 4.7uF | C_0805_2012Metric | C1, C2, C10, C11 |
| 1 | 100NF 100nF | C_0603_1608Metric | C3 |
| 1 | 10NF 10nF | C_0402_1005Metric | C4 |
| 3 | 100NF 100nF | C_0201_0603Metric | C5, C12, C14 |
| 2 | 47UF 47uF | C_1206_3216Metric | C6, C7 |
| 1 | 1NF 1nF | C_0402_1005Metric | C8 |
| 1 | 47PF 47pF | C_0402_1005Metric | C9 |
| 1 | 10NF 10nF | C_0201_0603Metric | C13 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 33UF 33uF | C_1206_3216Metric | C15, C16 |
| 1 | 4.7NF 4.7nF | C_0805_2012Metric | C17 |
| 1 | 39PF 39pF | C_0402_1005Metric | C18 |
| 1 | 33K2 33k2 | R_0603_1608Metric | R1 |
| 2 | 68K1 68k1 | R_0603_1608Metric | R2, R14 |
| 2 | 0 | R_0603_1608Metric | R3, R16 |
| 1 | 10K2 10k2 | R_0603_1608Metric | R4 |
| 1 | 3K24 3k24 | R_0603_1608Metric | R5 |
| 1 | 332K 332k | R_0603_1608Metric | R12 |
| 1 | 29K4 29k4 | R_0603_1608Metric | R13 |
| 1 | 49K4 49k4 | R_0603_1608Metric | R15 |
| 2 | 10K 10k | R_0603_1608Metric | R17, R25 |
| 1 | 1K91 1k91 | R_0603_1608Metric | R18 |
| 1 | 4K7 4k7 | R_0603_1608Metric | R19 |
| 3 | 100K 100k | R_0603_1608Metric | R20, R22, R24 |
| 1 | 200 | R_0603_1608Metric | R21 |
| 1 | 430 | R_0603_1608Metric | R23 |
Dual-Channel Embedded Power Supply Board design files
The KiCad project lives in the devjamescollier/Dual-Channel_Embedded_Power_Supply_Board repository on GitHub; these links point at the commit this page was built from.
Dual-Channel Embedded Power Supply Board: common questions
How big is the Dual-Channel Embedded Power Supply Board?
The Dual-Channel Embedded Power Supply Board measures 48 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dual-Channel Embedded Power Supply Board?
55 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dual-Channel Embedded Power Supply Board design files?
From the devjamescollier/Dual-Channel_Embedded_Power_Supply_Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dual-Channel Embedded Power Supply Board design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which devjamescollier chose for the repository.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k