66 open source boards using the TPS54331DR
Real designs built with the TPS54331DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763STM32
Huvud
bondus
42 × 42 mm116 parts4LGPL-3.0373ESP32
AnthC
Anthilla
85 × 56 mm203 parts4LNo license40STM32
OTTO-Beta-Main
bitfieldaudio
288.5 × 95 mm303 parts4LCC-BY-NC-4.037ESP32
OSSM ALT SERVO V3 4
jollydodo
55 × 50 mm120 parts4LCustom license31ESP32
Fluepdot
Fluepke
70 × 65 mm111 parts2LAGPL-3.017STM32
BedCooler
NicholasKorth
131.5 × 132.4 mm249 parts6LCC-BY-NC-4.011STM32
Scoms tacnpr
partio-scout
99.1 × 99.1 mm279 parts4LTAPR-OHL-1.09- schematic only · 177 parts
Retrace
ericrihm
177 partsMIT8 STM32
HotPlate
Markuselectronics
89 × 38 mm69 parts4LNo license7Tangenta
vmetodiev
243.8 × 243.8 mm534 parts4LCERN-OHL-P-2.05ESP32
30a water heater controller
flaviut
85 × 56 mm42 parts2LCERN-OHL-S-2.02NXP
Body
mattybrad
90 × 120 mm289 parts4LNo license1STM32
Monitor
zincVTD
62 × 35.4 mm48 parts2LNo license1- schematic only · 60 partsSTM32
Stm32-quadcopter fc
barrettbrody06
60 parts2LMIT1 PRODIGY-MOTHERBOARD
mark69163
160 × 120 mm333 parts4LNo license0ESP32
Esp32 s3 dwm3000 uwb anchor with relay outputs
Takingo
160 × 100 mm322 parts4LNo license0ESP32
Magnetometer node mainboard
Benjamin-girard-1
193 × 110 mm297 parts2LNo license0STM32
Solenoid board
SamsonChau
146.1 × 63.5 mm206 parts2LNo license0Raspberry Pi
Default
jackalkahwati
1500 × 290 mm180 parts2LNo license0STM32
Arsenal
shadedvox
163 × 83 mm173 parts4LApache-2.00ESP32
Lichtstab
kilimnik
100.5 × 87.7 mm139 parts4LNo license0ESP32
Prototype Main Board
Krypthick
80.9 × 66.5 mm71 parts4LNo license0STM32
Power-Reference-Board
jhuang0701
60 × 60 mm58 parts4LNo license0Dual-Channel Embedded Power Supply Board
devjamescollier
48 × 42 mm55 parts2LCERN-OHL-P-2.00Power
esb8
34.9 × 23.1 mm51 parts2LNo license0AVR/Arduino
Remote unit
danielmcmillan
94 × 56.3 mm47 parts2LMIT0ESP32
LeTube
llextv
83.1 × 34.9 mm34 parts2LNo license0ESP32
Tiny cam
danielstebbings
18 × 50 mm33 parts2LMPL-2.00- schematic only · 177 parts
Pcb2bom
Poovarasan46
177 partsMIT0 NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763Raspberry Pi
CanHat
bondus
65 × 30 mm33 parts2LGPL-3.0373ESP32
Brakechopper v1 1
jollydodo
35 × 23 mm43 parts2LCustom license31NXP
Body2
mattybrad
90 × 95 mm180 parts4LNo license1STM32
TPMS
zincVTD
62 × 47.2 mm47 parts2LNo license1ESP32
Geophys mainboard
Benjamin-girard-1
190 × 110 mm272 parts4LNo license0
How designs wire the TPS54331DR
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the TPS54331DR connects to, and the resistors, capacitors and other passives placed on it.
- The BOOT pin has a series capacitor on 22 of 28 designs, most often 100 nF (then 22 µF).
- The PH pin has a series capacitor on 22 of 26 designs, most often 100 nF (then 22 µF).
- The SS pin has a capacitor to GND on 21 of 27 designs, most often 10 nF (then 8.2 nF).
- The PH pin has a inductor on 21 of 26 designs, most often 10 µH (then 6.8 µH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BOOTpin 1 | Connected to: Signal 96% |
|
| VINpin 2 | Connected to: 5V 54% · a signal 43% |
|
| SSpin 4 | Connected to: Signal 93% |
|
| VSENSEpin 5 | Connected to: Signal 89% |
|
| COMPpin 6 | Connected to: Signal 85% |
|
| GNDpin 7 | Connected to: GND 85% | — |
| PHpin 8 | Connected to: Signal 92% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 32Bit shift register by MaltWhiskey, CanHat by bondus, AnthC by Anthilla and OTTO-Beta-Main by bitfieldaudio.
The TPS54331DR in open source designs
The gallery holds 66 open source boards using the TPS54331DR from 31 GitHub repositories; a typical one measures about 100 × 56.3 mm and carries around 75 components.
59% use four copper layers or more, and 23% carry an open source license.
The most starred is Mega-Cube-Board by MaltWhiskey.
Parts used alongside the TPS54331DR
Microcontrollers on boards using the TPS54331DR
What boards using the TPS54331DR are built for
TPS54331DR: common questions
Where can I find a TPS54331DR reference design?
Each of the 66 boards on this page is a real design using the TPS54331DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS54331DR BOOT pin connected?
The BOOT pin has a series capacitor on 22 of 28 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 28 open source designs using the TPS54331DR.
How is the TPS54331DR PH pin connected?
The PH pin has a series capacitor on 22 of 26 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 28 open source designs using the TPS54331DR.
How is the TPS54331DR SS pin connected?
The SS pin has a capacitor to GND on 21 of 27 designs, most often 10 nF (then 8.2 nF). Counted from the KiCad layouts of 28 open source designs using the TPS54331DR.
What parts are used alongside the TPS54331DR?
The STM32F103C8T6, XC6206PXXXMR, 16MB, 1GB and 8GB appear in the most repositories here.
Which microcontrollers do boards using the TPS54331DR use?
Most are built on ESP32 (18), STM32 (16), Raspberry Pi (5) and NXP (4).
How big is a typical board using the TPS54331DR?
The median is 100 × 56.3 mm, and 41% are two-layer designs.
What is the most popular open source board using the TPS54331DR?
By GitHub stars, Mega-Cube-Board by MaltWhiskey, with 763 stars.
Can I simulate one of these boards using the TPS54331DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.