Kicad hiltop lora board
devtank-ltd·kicad_hiltop_lora_board·kicad_hiltop_lora_board/lora_board.kicad_pcb
About the Kicad hiltop lora board
Kicad hiltop lora board is an open source PCB design by devtank-ltd, published on GitHub. It is a 2-layer board measuring 159.4 × 99.9 mm, with 42 components from 19 distinct parts.
Other key parts include the ERIC-LORA, LD1117S33TR_SOT223, AT25DN512CSSHF-B, CP2102N-A01-GQFN24 and XBee_SMT. By type, the board carries 25 resistors, 9 capacitors, 5 ICs, 1 connector, 1 jumper and 1 diode.
It belongs with the rf & radio designs in this gallery.
Main components on the Kicad hiltop lora board
Kicad hiltop lora board bill of materials (BOM)
42 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ERIC-LORA | eRIC-LoRa_RF_Module | U1 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | AT25DN512CSSHF-B | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CP2102N-A01-GQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U4 |
| 1 | XBee_SMT | Digi_XBee_SMT | U5 |
| 1 | Conn_03x32_DIN41612 | Socket_DIN41612-CaseC1-full-Male-96Pin-3rows_correct | J1 |
| 1 | Jumper_NC_Dual | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | MBR230LSFT1G | D_SOD-123 | D1 |
| 4 | 100nF | C_0603_1608Metric | C1, C4, C8, C9 |
| 2 | 10uF | C_0805_2012Metric | C2, C3 |
| 1 | 100uF | CP_Elec_6.3x7.7 | C5 |
| 1 | DNF | C_0603_1608Metric | C6 |
| 1 | 4.7uF | C_0603_1608Metric | C7 |
| 7 | 0R | R_0603_1608Metric | R1, R2, R3, R4, R6, R11, R15 |
| 13 | DNF | R_0603_1608Metric | R5, R10, R12, R16, R17, R18, R19, R20 +5 |
| 1 | 10K | R_0603_1608Metric | R7 |
| 2 | 4K7 | R_0603_1608Metric | R8, R9 |
| 1 | 24K | R_0603_1608Metric | R13 |
| 1 | 47K | R_0603_1608Metric | R14 |
Kicad hiltop lora board design files
The KiCad project lives in the devtank-ltd/kicad_hiltop_lora_board repository on GitHub; these links point at the commit this page was built from.
Kicad hiltop lora board: common questions
How big is the Kicad hiltop lora board?
The Kicad hiltop lora board measures 159.4 × 99.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad hiltop lora board?
42 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad hiltop lora board design files?
From the devtank-ltd/kicad_hiltop_lora_board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Kicad hiltop lora board design in my own project?
The repository has no license, so all rights stay with devtank-ltd. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568