LDC1314-Breakout
About the LDC1314-Breakout
LDC1314-Breakout is an open source PCB design by dfieschko, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 22.6 × 18.3 mm, with 13 components from 11 distinct parts.
Other key parts include the MCF8316A1VRGFR. By type, the board carries 5 connectors, 5 capacitors, 2 resistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A repository for breakout boards designed with KiCAD.
This design was created only recently and hasn't even been realized physically, let alone tested! Test results will be added somewhere in the repository once they're ready.
I also wrote Teensy libraries for this chip, which can be ported to other Arduino boards without much hassle. I intend to port the libraries to all Arduino boards in the near future. I also intend to write more thorough instructions and documentation, as well as a quick-start guide. The libraries can be found here: https://github.com/dfieschko/LDC1312-Arduino
Main components on the LDC1314-Breakout
LDC1314-Breakout bill of materials (BOM)
13 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCF8316A1VRGFR LDC1314 Texas Instruments | WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U1 |
| 1 | Coil0 | PinHeader_1x02_P1.27mm_Vertical | J1 |
| 1 | Coil1 | PinHeader_1x02_P1.27mm_Vertical | J2 |
| 1 | Coil2 | PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | Coil3 | PinHeader_1x02_P1.27mm_Vertical | J4 |
| 1 | Breadboard | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | 0603B473J500CT 100p Walsin Technology Corporation | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 3 | CL10A105KB8NNNC 100p Samsung Electro-Mechanics | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4 |
| 1 | CL10A105KB8NNNC 4.7u Samsung Electro-Mechanics | C_0603_1608Metric | C5 |
| 1 | RMCF0805JT620R 47k Stackpole Electronics Inc | R_0603_1608Metric | R1 |
| 1 | RMCF0805JG10K0 1M Stackpole Electronics Inc | R_0603_1608Metric | R2 |
LDC1314-Breakout design files
The KiCad project lives in the dfieschko/Breakouts repository on GitHub; these links point at the commit this page was built from.
LDC1314-Breakout: common questions
How big is the LDC1314-Breakout?
The LDC1314-Breakout measures 22.6 × 18.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LDC1314-Breakout?
13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LDC1314-Breakout design files?
From the dfieschko/Breakouts repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LDC1314-Breakout design in my own project?
Yes, under the terms of its GPL-3.0 license, which dfieschko chose for the repository.
More boards in Breakouts
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446