Placement study
dganin-hw·bldc-foc·hardware/esc-4in1/kicad/placement-study.kicad_pcb
About the Placement study PCB
Placement study is an open source PCB design by dganin-hw, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 36 components from 36 distinct parts.
By type, the board carries 24 transistors and 12 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
Контроллер бесколлекторного мотора с FOC на STM32G431: своя силовая плата, плата энкодера AS5047P, печатный стенд и прошивка на C
Четырёхканальный регулятор для квадрокоптера, следующий шаг после стенда. Сейчас это инженерная проработка: схема в KiCad и проверка размещения основных узлов. Это не комплект для производства: Gerber из этих файлов не делать, детали по ним не заказывать.
- Четыре мотора, внешний покупной полётный контроллер, команды по DShot и телеметрия обратно. - Питание 4S (16,8 В заряженный аккумулятор), с запасом на 6S (25,2 В). - Рабочая гипотеза: два STM32G474RET6 (LQFP64), каждый управляет двумя DRV8323S и двумя трёхфазными мостами через HRTIM. Для сравнения остаётся базовый вариант с четырьмя…

Placement study bill of materials (BOM)
36 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Q1 | TDSON-8-1 | Q1 |
| 1 | Q2 | TDSON-8-1 | Q2 |
| 1 | Q3 | TDSON-8-1 | Q3 |
| 1 | Q4 | TDSON-8-1 | Q4 |
| 1 | Q5 | TDSON-8-1 | Q5 |
| 1 | Q6 | TDSON-8-1 | Q6 |
| 1 | Q7 | TDSON-8-1 | Q7 |
| 1 | Q8 | TDSON-8-1 | Q8 |
| 1 | Q9 | TDSON-8-1 | Q9 |
| 1 | Q10 | TDSON-8-1 | Q10 |
| 1 | Q11 | TDSON-8-1 | Q11 |
| 1 | Q12 | TDSON-8-1 | Q12 |
| 1 | Q13 | TDSON-8-1 | Q13 |
| 1 | Q14 | TDSON-8-1 | Q14 |
| 1 | Q15 | TDSON-8-1 | Q15 |
| 1 | Q16 | TDSON-8-1 | Q16 |
| 1 | Q17 | TDSON-8-1 | Q17 |
| 1 | Q18 | TDSON-8-1 | Q18 |
| 1 | Q19 | TDSON-8-1 | Q19 |
| 1 | Q20 | TDSON-8-1 | Q20 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Q21 | TDSON-8-1 | Q21 |
| 1 | Q22 | TDSON-8-1 | Q22 |
| 1 | Q23 | TDSON-8-1 | Q23 |
| 1 | Q24 | TDSON-8-1 | Q24 |
| 1 | C10 | C_1210_3225Metric | C10 |
| 1 | C11 | C_1210_3225Metric | C11 |
| 1 | C12 | C_1210_3225Metric | C12 |
| 1 | C20 | C_1210_3225Metric | C20 |
| 1 | C21 | C_1210_3225Metric | C21 |
| 1 | C22 | C_1210_3225Metric | C22 |
| 1 | C30 | C_1210_3225Metric | C30 |
| 1 | C31 | C_1210_3225Metric | C31 |
| 1 | C32 | C_1210_3225Metric | C32 |
| 1 | C40 | C_1210_3225Metric | C40 |
| 1 | C41 | C_1210_3225Metric | C41 |
| 1 | C42 | C_1210_3225Metric | C42 |
Placement study design files
The KiCad project lives in the dganin-hw/bldc-foc repository on GitHub; these links point at the commit this page was built from.
Placement study: common questions
How big is the Placement study PCB?
The Placement study measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Placement study?
36 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Placement study design files?
From the dganin-hw/bldc-foc repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Placement study design in my own project?
The repository has no license, so all rights stay with dganin-hw. Use it as a reference, and ask the author before reusing the design.
More boards in bldc-foc
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979