Foc encoder

dganin-hw·bldc-foc·hardware/encoder-board/kicad/foc-encoder.kicad_pcb

Foc encoder PCB layout, top view — open source board by dganin-hw

About the Foc encoder PCB

Foc encoder is an open source PCB design by dganin-hw, published on GitHub. It is a 2-layer board measuring 32 × 28 mm, with 8 components from 7 distinct parts.

Other key parts include the AS5047P-ATSM. By type, the board carries 4 resistors, 2 capacitors, 1 IC and 1 connector.

It belongs with the robotics & motion designs in this gallery.

From the project

Контроллер бесколлекторного мотора с FOC на STM32G431: своя силовая плата, плата энкодера AS5047P, печатный стенд и прошивка на C

Маленькая плата с датчиком AS5047P. Она измеряет угол ротора по магниту на валу мотора и передаёт его в STM32 основной платы по SPI. На плате восемь компонентов: датчик, два конденсатора, четыре резистора и разъём.

Слева сторона, обращённая к магниту, справа обратная сторона с разъёмом.

Разъём J1 - JST SM06B-GHS-TB(LF)(SN), шаг 1,25 мм. Ответная часть - корпус GHR-06V-S и шесть контактов SSHL-002T-P0.2. На другом конце кабеля гнездовая колодка 1×6 с шагом 2,54 мм под J3. Готовый кабель GH-GH сюда не подходит.

Foc encoder, from the project README
From the project README

Main components on the Foc encoder

Foc encoder bill of materials (BOM)

8 components, 7 distinct parts.

QtyPartRefs
1
AS5047P-ATSM
U1
1
SM06B-GHS-TB(LF)(SN)
J1
1
CL10B104KB8NNNC
100n / 16V X7R
C1
1
CL10B105KO8NNNC
1u / 16V X7R
C2
1
RC0603FR-0710KL
10k / 1%
R1
2
RC0603FR-0747KL
47k / 1%
R2, R3
1
RC0603FR-0733RL
33R / 1%
R4

Foc encoder design files

The KiCad project lives in the dganin-hw/bldc-foc repository on GitHub; these links point at the commit this page was built from.

Foc encoder: common questions

How big is the Foc encoder PCB?

The Foc encoder measures 32 × 28 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Foc encoder?

8 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Foc encoder design files?

From the dganin-hw/bldc-foc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Foc encoder design in my own project?

The repository has no license, so all rights stay with dganin-hw. Use it as a reference, and ask the author before reusing the design.

More boards in bldc-foc

Similar boards