AgroESP32 firmware

diegoPonton·agroESP32_firmware·hardware/kicad/agroESP32_PCB.kicad_pcb

AgroESP32 firmware PCB layout, top view — open source board by diegoPonton

About the AgroESP32 firmware PCB

AgroESP32 firmware is an open source PCB design by diegoPonton, published on GitHub. It is a 2-layer board measuring 75 × 51 mm, with 6 components from 5 distinct parts.

Other key parts include the XIAO_ESP32_S3 and 3073. By type, the board carries 4 connectors and 2 ICs.

It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.

From the project

Red de sensores agrícolas LoRa 915 MHz: PCB propia en KiCad (XIAO ESP32-S3 + RFM95W), firmware ESP32 y plataforma web en la nube

- El problema - Resultados - Arquitectura - Hardware - PCB del nodo XIAO (diseño propio) - Esquemático y mapa de conexiones - BOM - Del diseño al nodo en campo - Nodo ESP32 DOIT y gateway - Firmware - Plataforma web - Pruebas de alcance - Problemas de ingeniería resueltos - Qué demuestra este proyecto - Estructura del repositorio - Compilar y flashear - Próximos pasos

AgroESP32 firmware, from the project README
From the project README

Main components on the AgroESP32 firmware

AgroESP32 firmware bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO_ESP32_S3
Seeed Studio
U1
1
3073
Adafruit Industries LLC
U2
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J1
2
SCREW_TERMINAL_01X04
Screw_Terminal_01x04
J2, J3
1
SCREW_TERMINAL_01X03
Screw_Terminal_01x03
J4

AgroESP32 firmware design files

The KiCad project lives in the diegoPonton/agroESP32_firmware repository on GitHub; these links point at the commit this page was built from.

AgroESP32 firmware: common questions

How big is the AgroESP32 firmware PCB?

The AgroESP32 firmware measures 75 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AgroESP32 firmware?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AgroESP32 firmware design files?

From the diegoPonton/agroESP32_firmware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AgroESP32 firmware design in my own project?

The repository has no license, so all rights stay with diegoPonton. Use it as a reference, and ask the author before reusing the design.

Similar boards