Zzrx40-clone
dilshan·zzrx40-clone·design/zzrx40.kicad_pcb
About the Zzrx40-clone PCB
Zzrx40-clone is an open source PCB design by dilshan, published on GitHub under the Custom license license. It is a 2-layer board measuring 119 × 39.4 mm, with 48 components from 34 distinct parts.
Other key parts include the uA7808, SA602A and LM386N-1. By type, the board carries 20 capacitors, 7 resistors, 6 diodes, 4 connectors, 3 ICs and 3 inductors.
It belongs with the rf & radio designs in this gallery.
From the project
Extended version of ZZRX-40 radio receiver.
This repository contains my custom PCB design for the ZZRX-40, a classic 40-meter amateur radio receiver originally designed by Craig Johnson (AA0ZZ). Since I could not find the original design files online, I drew the schematic myself and designed a custom board that works well with components that are easy to find in local electronics shops.
In this repository, you will find the complete KiCad project files, including the schematic, PCB layout, and bill of materials. I have also provided the Gerber files in the releases section of this repository so you can easily order the boards from…

Main components on the Zzrx40-clone
Zzrx40-clone bill of materials (BOM)
48 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | uA7808 | TO-220-3_Vertical | U101 |
| 1 | SA602A | DIP-8_W7.62mm_Socket_LongPads | U102 |
| 1 | LM386N-1 LM386 | DIP-8_W7.62mm_Socket_LongPads | U103 |
| 1 | 40m Crystal | Crystal_HC49-4H_Vertical | Y101 |
| 1 | SMA Female | SMA_Amphenol_901-143_Horizontal | J101 |
| 1 | 5.5mm Barrel Jack Socket | BarrelJack_Horizontal | J103 |
| 1 | JST 2-Pin | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J104 |
| 1 | 3.5mm Jack Socket | Jack_3.5mm_Ledino_KB3SPRS_Horizontal | J105 |
| 2 | 2Pin-2.54mm Jumper | PinHeader_1x02_P2.54mm_Vertical | JP101, JP102 |
| 1 | RK097 - B10K(SW) | Potentiometer_Alps_RK097_Single_Horizontal_Switch | RV101 |
| 1 | RK097 - B10K | Potentiometer_Alps_RK097_Single_Horizontal | RV102 |
| 2 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D101, D104 |
| 1 | 1N4001 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D102 |
| 1 | 5mm RED LED | LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm | D103 |
| 2 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D105, D106 |
| 1 | 3.3uH | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L101 |
| 1 | 15uH | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L102 |
| 1 | 4.7uH | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L103 |
| 5 | 0.1MFD | C_Rect_L7.0mm_W3.5mm_P5.00mm | C101, C103, C107, C108, C113 |
| 1 | 10MFD | CP_Radial_D5.0mm_P2.50mm | C102 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100MFD | CP_Radial_D6.3mm_P2.50mm | C104, C114, C117 |
| 1 | 180PF 180pF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C105 |
| 1 | 820PF 820pF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C106 |
| 2 | 0.22MFD | C_Rect_L7.0mm_W3.5mm_P5.00mm | C109, C110 |
| 1 | 4.7MFD | CP_Radial_D5.0mm_P2.50mm | C111 |
| 1 | 2.2MFD | CP_Radial_D5.0mm_P2.50mm | C112 |
| 3 | 100PF 100pF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C115, C116, C120 |
| 1 | 220PF 220pF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C118 |
| 1 | 50pF | TZ-03-TRIMMER | C119 |
| 2 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R101, R104 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R102, R103 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R105 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R106 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R107 |
Zzrx40-clone design files
The KiCad project lives in the dilshan/zzrx40-clone repository on GitHub; these links point at the commit this page was built from.
- Layoutdesign/zzrx40.kicad_pcb
- Schematicdesign/zzrx40.kicad_sch
- BOMresources/zzrx40-bom.csv
Zzrx40-clone: common questions
How big is the Zzrx40-clone PCB?
The Zzrx40-clone measures 119 × 39.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Zzrx40-clone?
48 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Zzrx40-clone design files?
From the dilshan/zzrx40-clone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Zzrx40-clone design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568