6 open source boards using the LM386N-1
Real designs built with the LM386N-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Batlistener
curiouselectric
50 × 100 mm46 parts2LMIT14ESP32
Serrasoid TRX 29M
kazushinjo
170 × 150 mm328 parts4LGPL-3.00AVR/Arduino
7mhz ssb trx
ngs
84.5 × 93.4 mm82 parts2LNo license0SkyEar
aberhe-eng
90 × 64 mm48 parts2LNo license0Zzrx40-clone
dilshan
119 × 39.4 mm48 parts2LCustom license0- schematic only · 52 partsTI MSP430/CC
MSP430handheld hardware
aradanmn
52 partsNo license0
The LM386N-1 in open source designs
The gallery holds 6 open source boards using the LM386N-1 from 6 GitHub repositories; a typical one measures about 90 × 93.4 mm and carries around 50 components.
80% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Batlistener by curiouselectric.
Microcontrollers on boards using the LM386N-1
What boards using the LM386N-1 are built for
LM386N-1: common questions
Where can I find a LM386N-1 reference design?
Each of the 6 boards on this page is a real design using the LM386N-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM386N-1 use?
Most are built on AVR/Arduino (1), ESP32 (1) and TI MSP430/CC (1).
How big is a typical board using the LM386N-1?
The median is 90 × 93.4 mm, and 80% are two-layer designs.
What is the most popular open source board using the LM386N-1?
By GitHub stars, Batlistener by curiouselectric, with 14 stars.
Can I simulate one of these boards using the LM386N-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.