EEG Prototype
diosey·EEG_Prototype·Hardware/EEG_Prototype.kicad_pcb
About the EEG Prototype PCB
EEG Prototype is an open source PCB design by diosey, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 81.6 × 96.4 mm, with 55 components from 31 distinct parts.
Other key parts include the AD620, TL084 and ADS1115IDGS. By type, the board carries 32 resistors, 11 capacitors, 6 connectors, 4 ICs and 1 switch.
It belongs with the iot & wireless and test & measurement designs in this gallery.
From the project
Prototype of EEG with ESP32
A prototype electroencephalograph (EEG) for acquiring and recording the brain's electrical activity, with real-time visualization in both time and frequency domains.
Developed as a degree project at Universidad Politécnica Territorial de Aragua "Federico Brito Figueroa" (Venezuela).
This project implements a complete EEG acquisition system composed of:
- Analog front-end: Low-noise biopotential acquisition circuit with instrumentation amplifier, eighth-order active filter with butterworth topology, non-inverting adder for an offset to adapt the signal to logical level required for ADC and…
Main components on the EEG Prototype
EEG Prototype bill of materials (BOM)
55 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD620 | DIP-8_W7.62mm_Socket | U1 |
| 2 | TL084 | DIP-14_W7.62mm_Socket | U2, U3 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U4 |
| 2 | Conn_01x15_Socket | PinSocket_1x15_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x01_Socket | Banana_Cliff_FCR7350N_S16N-PC_Horizontal | J3 |
| 1 | Conn_01x01_Socket | Banana_Cliff_FCR7350B_S16N-PC_Horizontal | J4 |
| 1 | Conn_01x01_Socket | Banana_Cliff_FCR7350R_S16N-PC_Horizontal | J5 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J6 |
| 1 | 520 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | RG1 |
| 1 | SW_DPST | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW1 |
| 1 | 0.22uF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | 3.3uF | C_Radial_D5.0mm_H7.0mm_P2.00mm | C2 |
| 1 | 2.2uF | C_Radial_D5.0mm_H7.0mm_P2.00mm | C3 |
| 3 | 0.33uF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C4, C5, C7 |
| 1 | 22nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C6 |
| 1 | 47nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C8 |
| 2 | 100nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C9, C10 |
| 1 | 220nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C11 |
| 1 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 2 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R21 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 150K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R8, R14, R15, R18, R19 |
| 3 | 1500K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R10, R11 |
| 2 | 680K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6, R7 |
| 1 | 330K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
| 2 | 33K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R12, R17 |
| 1 | 220K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R13 |
| 2 | 15K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R16, R28 |
| 1 | 80K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R20 |
| 4 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R22, R23, R24, R25 |
| 2 | 27K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R26, R27 |
| 5 | 2.7K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R29, R30, R31, R32, R33 |
EEG Prototype design files
The KiCad project lives in the diosey/EEG_Prototype repository on GitHub; these links point at the commit this page was built from.
EEG Prototype: common questions
How big is the EEG Prototype PCB?
The EEG Prototype measures 81.6 × 96.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EEG Prototype?
55 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the EEG Prototype design files?
From the diosey/EEG_Prototype repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EEG Prototype design in my own project?
Yes, under the terms of its GPL-3.0 license, which diosey chose for the repository.
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kStm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547