Multi saturation module board b
About the Multi saturation module board b
Multi saturation module board b is an open source PCB design by DIYSynthMNL, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 108.5 mm, with 20 components from 19 distinct parts.
By type, the board carries 6 connectors, 6 diodes, 3 switches and 1 resistor.
It belongs with the audio designs in this gallery.
From the project
A multi saturation module with voltage controlled wet/dry mix
Multi saturation module board b bill of materials (BOM)
20 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Mix_audio_out | AudioJack_3.5mm_long_pads | J1 |
| 1 | Audio_in | AudioJack_3.5mm_long_pads | J2 |
| 1 | Mix_CV_in | AudioJack_3.5mm_long_pads | J4 |
| 1 | Wet_audio_out | AudioJack_3.5mm_long_pads | J5 |
| 1 | Board_B_1 | PinSocket_1x16_P2.54mm_Vertical | J8 |
| 1 | Board_B_2 | PinSocket_1x16_P2.54mm_Vertical | J9 |
| 1 | Dry_gain_10k | Potentiometer_Bourns_3296W_Vertical_BigPads | RV1 |
| 1 | Wet_gain_10k | Potentiometer_Bourns_3296W_Vertical_BigPads | RV2 |
| 1 | CV_lvl_50k | Potentiometer_RV09_BigPads | RV3 |
| 1 | Mix_trim_50k | Potentiometer_RV09_BigPads | RV4 |
| 1 | Clipping | ToggleSwitch_MTS-102_SPDT | SW1 |
| 1 | Xformer_bypass | ToggleSwitch_MTS-202_DPDT | SW2 |
| 1 | Opto_bypass | ToggleSwitch_MTS-202_DPDT | SW3 |
| 1 | ClipLed1 | LED_D5.0mm_BigPads | D1 |
| 1 | ClipLed2 | LED_D5.0mm_BigPads | D2 |
| 2 | 4148 | D_4148_BigPads | D3, D4 |
| 1 | Opto_sat | LED_D5.0mm_BigPads | D5 |
| 1 | Wet/Dry | LED_D5.0mm_BigPads | D6 |
| 1 | 330R | R_quarter_watt_L6.3mm_D2.5mm_P7.62mm | R22 |
Multi saturation module board b design files
The KiCad project lives in the DIYSynthMNL/Eurorack-Multi-Saturation-Module repository on GitHub; these links point at the commit this page was built from.
Multi saturation module board b: common questions
How big is the Multi saturation module board b?
The Multi saturation module board b measures 40 × 108.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multi saturation module board b?
20 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Multi saturation module board b design files?
From the DIYSynthMNL/Eurorack-Multi-Saturation-Module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Multi saturation module board b design in my own project?
Yes, under the terms of its GPL-3.0 license, which DIYSynthMNL chose for the repository.
More boards in Eurorack-Multi-Saturation-Module
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687