Battery ups
dizcza·battery_ups_kicad
About the Battery ups PCB
Battery ups is an open source PCB design by dizcza, published on GitHub. It is a 2-layer board measuring 85.5 × 122 mm, with 12 components from 9 distinct parts.
By type, the board carries 3 ICs, 3 connectors, 2 battery holders, 2 diodes, 1 fuse and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Battery uninterruptible power supply Kicad design
BMS-2S-2P (2 cells with 2 parallel batteries each) HX-2S-JH20 Support both 18650 and 21700 Li-Ion batteries XL4015 StepDown: 12V -> 8.4V A very cheap StepUp: 8.4V -> 12V Fuse 5A, switch, battery capacity tester Diodes to bypass current if mains is powered * DC 5.5 2.1 input and output jackets

Battery ups bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | XL4015_StepDown | U1 |
| 1 | ~ | HX-2S-JH20 | U2 |
| 1 | ~ | StepUp12V | U3 |
| 2 | Barrel_Jack_MountingPin | BarrelJack_Horizontal | J1, J2 |
| 1 | Conn_01x02 | BattTester | J3 |
| 2 | Battery_Cell | BAT_BK-18650-21700 | BT1, BT2 |
| 1 | Fuse | Fuse-5x20 | F1 |
| 1 | SW_SPDT | SW-TH_SS-12D11G5R | SW1 |
| 2 | D | D_P600_R-6_P12.70mm_Horizontal | D1, D2 |
Battery ups design files
The KiCad project lives in the dizcza/battery_ups_kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutbattery_ups.kicad_pcb
- Schematicbattery_ups.kicad_sch
Battery ups: common questions
How big is the Battery ups PCB?
The Battery ups measures 85.5 × 122 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery ups?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Battery ups design files?
From the dizcza/battery_ups_kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Battery ups design in my own project?
The repository has no license, so all rights stay with dizcza. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k