Fx ret reroute
dj-filippo241·maelcum_mixer·pcb/fx-ret/reroute/fx-ret-reroute.kicad_pcb
About the Fx ret reroute PCB
Fx ret reroute is an open source PCB design by dj-filippo241, published on GitHub. It is a 4-layer board measuring 100 × 220 mm, with 221 components from 32 distinct parts.
Other key parts include the V2181L, OPA1612AIDR and OPA1654AIDR. By type, the board carries 120 resistors, 54 capacitors, 18 ICs, 12 diodes and 1 connector.
From the project
Mixer dub modulare 100% analogico: design doc e simulazioni LTspice
A one-off, fully analogue, modular dub performance mixer for a 5-way sound system.
Musical decisions and panel layout: Filippo. Engineering (topologies, simulations, PCB generation): Claude, under Filippo's review.
Status. Nothing has been built or measured on a bench yet. Every circuit number comes from LTspice simulation or from Python models. The musical behaviour (control laws, saturators, filter character) is being validated by ear on a Max for Live prototype. Component purchases are on hold until that prototype is complete. The PCBs are generated drafts.
Main components on the Fx ret reroute
Fx ret reroute bill of materials (BOM)
221 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | V2181L | SOIC-8_3.9x4.9mm_P1.27mm | U10, U11, U14, U15, U18, U19, U22, U23 |
| 8 | OPA1612AIDR | SOIC-8_3.9x4.9mm_P1.27mm | U12, U13, U16, U17, U20, U21, U24, U25 |
| 2 | OPA1654AIDR | SOIC-14_3.9x8.7mm_P1.27mm | U26, U27 |
| 1 | 2x16 ponte reroute | PinHeader_2x16_P2.54mm_Vertical | J1 |
| 12 | 50k | Potentiometer_Bourns_3214W_Vertical | RV1, RV2, RV4, RV5, RV6, RV8, RV9, RV10 +4 |
| 4 | 2k | Potentiometer_Bourns_3214W_Vertical | RV3, RV7, RV11, RV15 |
| 12 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 2 | 47u 25V | CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | 10u 25V | C_1206_3216Metric | C3, C4 |
| 2 | 1u | C_1206_3216Metric | C5, C6 |
| 36 | 100n | C_0805_2012Metric | C7, C8, C10, C11, C13, C14, C16, C17 +28 |
| 8 | 22p C0G | C_0805_2012Metric | C9, C12, C20, C23, C31, C34, C42, C45 |
| 4 | 56n C0G | C_1210_3225Metric | C15, C26, C37, C48 |
| 32 | 20k 0.1% | R_0805_2012Metric | R1, R5, R6, R10, R27, R31, R32, R36 +24 |
| 8 | 6k19 | R_0805_2012Metric | R2, R7, R28, R33, R54, R59, R80, R85 |
| 8 | 150k | R_0805_2012Metric | R3, R8, R29, R34, R55, R60, R81, R86 |
| 8 | 51 | R_0805_2012Metric | R4, R9, R30, R35, R56, R61, R82, R87 |
| 4 | 37.4k 0.1% | R_0805_2012Metric | R11, R37, R63, R89 |
| 4 | 43.2k 0.1% | R_0805_2012Metric | R12, R38, R64, R90 |
| 4 | 1M 0.1% | R_0805_2012Metric | R13, R39, R65, R91 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 18.7k 0.1% | R_0805_2012Metric | R14, R40, R66, R92 |
| 4 | 40.2k 0.1% | R_0805_2012Metric | R15, R41, R67, R93 |
| 4 | 2.61k 0.1% | R_0805_2012Metric | R16, R42, R68, R94 |
| 4 | 3.83k 0.1% | R_0805_2012Metric | R17, R43, R69, R95 |
| 4 | 10k 0.1% | R_0805_2012Metric | R18, R44, R70, R96 |
| 4 | 9k76 0.1% | R_0805_2012Metric | R19, R45, R71, R97 |
| 4 | 18k7 0.1% | R_0805_2012Metric | R20, R46, R72, R98 |
| 4 | 100k | R_0805_2012Metric | R21, R47, R73, R99 |
| 4 | 18k2 0.1% | R_0805_2012Metric | R22, R48, R74, R100 |
| 8 | 1k 0.1% | R_0805_2012Metric | R23, R25, R49, R51, R75, R77, R101, R103 |
| 4 | 17k4 0.1% | R_0805_2012Metric | R24, R50, R76, R102 |
| 4 | 2M7 | R_0805_2012Metric | R26, R52, R78, R104 |
Fx ret reroute design files
The KiCad project lives in the dj-filippo241/maelcum_mixer repository on GitHub; these links point at the commit this page was built from.
Fx ret reroute: common questions
How big is the Fx ret reroute PCB?
The Fx ret reroute measures 100 × 220 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Fx ret reroute?
221 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fx ret reroute design files?
From the dj-filippo241/maelcum_mixer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fx ret reroute design in my own project?
The repository has no license, so all rights stay with dj-filippo241. Use it as a reference, and ask the author before reusing the design.
More boards in maelcum_mixer
Master segnale
dj-filippo241
100 × 220 mm275 parts4LNo license2Mic
dj-filippo241
100 × 220 mm204 parts4LNo license2Fx ret
dj-filippo241
100 × 220 mm197 parts4LNo license2Canale
dj-filippo241
100 × 220 mm191 parts4LNo license2Master uscita-L
dj-filippo241
100 × 220 mm153 parts4LNo license2Master uscita-R
dj-filippo241
100 × 220 mm142 parts4LNo license2Mono
dj-filippo241
100 × 220 mm125 parts4LNo license2Fx send
dj-filippo241
100 × 220 mm118 parts4LNo license2Psu in
dj-filippo241
100 × 220 mm39 parts4LNo license2Mic comandi
dj-filippo241
59 × 186 mm10 parts4LNo license2Mono comandi
dj-filippo241
59 × 186 mm9 parts4LNo license2