Psu in
dj-filippo241·maelcum_mixer·pcb/psu-in/psu-in.kicad_pcb
About the Psu in PCB
Psu in is an open source PCB design by dj-filippo241, published on GitHub. It is a 4-layer board measuring 100 × 220 mm, with 39 components from 19 distinct parts.
By type, the board carries 14 diodes, 8 fuses, 7 capacitors, 6 resistors and 3 connectors.
From the project
Mixer dub modulare 100% analogico: design doc e simulazioni LTspice
A one-off, fully analogue, modular dub performance mixer for a 5-way sound system.
Musical decisions and panel layout: Filippo. Engineering (topologies, simulations, PCB generation): Claude, under Filippo's review.
Status. Nothing has been built or measured on a bench yet. Every circuit number comes from LTspice simulation or from Python models. The musical behaviour (control laws, saturators, filter character) is being validated by ear on a Max for Live prototype. Component purchases are on hold until that prototype is complete. The PCBs are generated drafts.
Psu in bill of materials (BOM)
39 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C96 maschio | DIN41612_C_3x32_Male_Horizontal_THT | J1 |
| 1 | Mini-Fit Jr 2x12 | Molex_Mini-Fit_Jr_5566-24A2_2x12_P4.20mm_Vertical | J2 |
| 1 | 1x3 driver ventole | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 2 | T4A | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1, F2 |
| 2 | T1A | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F3, F4 |
| 3 | T500mA | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F5, F6, F8 |
| 1 | T2A | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F7 |
| 1 | bond CHASSIS-AGND | PinHeader_1x02_P2.54mm_Vertical | JB1 |
| 2 | SMBJ26A | D_SMB | D1, D3 |
| 7 | SS54 | D_SMC | D2, D4, D6, D8, D10, D12, D14 |
| 2 | SMBJ22A | D_SMB | D5, D7 |
| 2 | SMBJ33A | D_SMB | D9, D11 |
| 1 | SMBJ5.0A | D_SMB | D13 |
| 2 | 2200u 35V | CP_Radial_D18.0mm_P7.50mm | C1, C2 |
| 2 | 1000u 35V | CP_Radial_D12.5mm_P5.00mm | C3, C4 |
| 2 | 1000u 63V | CP_Radial_D12.5mm_P5.00mm | C5, C6 |
| 1 | 1000u 10V | CP_Radial_D12.5mm_P5.00mm | C7 |
| 1 | 10k | R_0805_2012Metric | R1 |
| 5 | 0 | R_2512_6332Metric | R2, R3, R4, R5, R6 |
Psu in design files
The KiCad project lives in the dj-filippo241/maelcum_mixer repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/psu-in/psu-in.kicad_pcb
- Schematicpcb/psu-in/psu-in.kicad_sch
- BOMpcb/psu-in/bom.csv
Psu in: common questions
How big is the Psu in PCB?
The Psu in measures 100 × 220 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Psu in?
39 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Psu in design files?
From the dj-filippo241/maelcum_mixer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Psu in design in my own project?
The repository has no license, so all rights stay with dj-filippo241. Use it as a reference, and ask the author before reusing the design.
More boards in maelcum_mixer
Master segnale
dj-filippo241
100 × 220 mm275 parts4LNo license2Fx ret reroute
dj-filippo241
100 × 220 mm221 parts4LNo license2Mic
dj-filippo241
100 × 220 mm204 parts4LNo license2Fx ret
dj-filippo241
100 × 220 mm197 parts4LNo license2Canale
dj-filippo241
100 × 220 mm191 parts4LNo license2Master uscita-L
dj-filippo241
100 × 220 mm153 parts4LNo license2Master uscita-R
dj-filippo241
100 × 220 mm142 parts4LNo license2Mono
dj-filippo241
100 × 220 mm125 parts4LNo license2Fx send
dj-filippo241
100 × 220 mm118 parts4LNo license2Mic comandi
dj-filippo241
59 × 186 mm10 parts4LNo license2Mono comandi
dj-filippo241
59 × 186 mm9 parts4LNo license2